Question for those running Tony's 3-4/5-6

[dropmech]

Are you using the stock rear trailing arms or did you switch out for the adjustables?

 

[a4edwin]

Mine are stock.

 

[dropmech]

Thanks for the reply Edwin. Any issues? Popping or clunking?

 

[NathanJax]

stock, but running the re-locator brackets

 

[dropmech]

Thanks Nate. I'm actually installing the rear hardware kit this weekend. Hoping to get the 5/6 kit soon.

 

[NORCAL SS]

remember to move the swaybar over in rear and also redrill the 2 holes on the bracket mount over 1 inch on the drivers side swaybar axle bracket.

 

[dropmech]

remember to move the swaybar over in rear and also redrill the 2 holes on the bracket mount over 1 inch on the drivers side swaybar axle bracket.

Thanks! Yeah I did that a while back when I installed the spohn pan hard bar.

 

[04blackout]

Stock with the brackets here. One of these days ill swap out to the actual adjustable bars though

 

[dropmech]

What's your reasoning behind switching to adjustables?

 

[NORCAL SS]

if you do both the upper and lower you can push the rear axle back to center it in well.

NOTE= Buying only lowers will give you so much negative pinion angle truck will vibrate bad. Had a guy that just bought lowers from a online place and moved the axle so far back to try to center pinion was facing like -8. I always set people up with both upper/lowers. Make lowers 9/16 longer and uppers 1/2 inch longer.

 

[dropmech]

if you do both the upper and lower you can push the rear axle back to center it in well.

NOTE= Buying only lowers will give you so much negative pinion angle truck will vibrate bad. Had a guy that just bought lowers from a online place and moved the axle so far back to try to center pinion was facing like -8. I always set people up with both upper/lowers. Make lowers 9/16 longer and uppers 1/2 inch longer.

Great info. THanks!

 

[a4edwin]

Only some of the bolts were loose so it did make some noise. Got new tires and a wheel alignment. I asked the tech to check and tightened everything up.