No. Sorry
Parting out NNBS Escalade
- Thread starter LanceD
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
swathdiver
Full Access Member
How much for the 4 splash shield bolts if available?
I'm not sure I know what you're referring to
swathdiver
Full Access Member
Your splash shield probably melted, it was attached to the bottom of the core support and went back to the engine support crossmember. 4 bolts (#12) that held #11 in place.
Your splash shield probably melted, it was attached to the bottom of the core support and went back to the engine support crossmember. 4 bolts (#12) that held #11 in place.
Oh yeah that all melted. If you can figure out what size the bolts are, I will dig through my box of other bolts I took off and see if I can match them up
swathdiver
Full Access Member
That's alright Lance. I was just trying to keep them all the same on my truck but can get similar at Home Depot easy enough. They are M10 x 1.5 x 25 mm with a 28mm washer and take a 15mm socket. Home Depot ones will take a 17 mm socket and use a 30 mm washer.
Kee Fuller
Full Access Member
Still got the gauge cluster and the housing?
Flyinganvil
TYF Newbie
- Joined
- Apr 11, 2019
- Posts
- 1
- Reaction score
- 0
Sorry wrong year
James Parker
TYF Newbie
- Joined
- Apr 1, 2019
- Posts
- 6
- Reaction score
- 6
Cluster available?
SuperDave
TYF Newbie
Still parting it out?
Yes but no trim housing
Yes
Do you have the dome lights for the rear? Both if possible. Not just the lense, the entire assembly.
@LanceD
I might have one still, i’ll Have to look
Sold
Yes, sorry for the late reply
No
Similar threads
