no rear speakers after removing rear controls!!!!

[benztrk]

Ok, I want to change my factory head unit (in a 2000 Yukon) to a Jensen 7" flip out unit that I have. I won't be needing the rear controls in the center console, so I just unplugged them.... After have major issues with the Jensen head unit, I reinstalled the factory head unit until a later date. I had already fabed up filler plates for both the Tape Deck and the Rear Control panel in the center console, so I just left them out. After reinstalling the factory unit..... no sound in the rear speakers. I plugged back in the rear controls and now it works fine. So what do you have to do to bypass/ delete the rear control panel in the center console. I'm hoping that has something to do with the lack of sound that i got when installing the Jensen unit. Any suggestions??? I bought the wiring harness the book told me to, GM01 I believe. Is there a different one because of the rear controls????

 

[diffrnt]

Someone will probably chime in with a better solution. I had the same problem, so plugged the rear controls back in and place the entire unit under the console. I did not feel like tracing down the exact wires so this was quick and dirty. I haven’t had any problems since. I put my DTV tuner in the open space that was left by removing the rear controls.

 

[benztrk]

look at my other thread, there is a wire that needs to be jumped.....

http://www.tahoeyukonforum.com/forum/showthread.php?t=4639

 

[benztrk]

Got the head unit working but still have to leavre the rear controls plugged in...... Oh well, probably just drop it inside the console and hide it.