NEED HELP!!

[03tahoe5_3]

I’m putting 3inch spindles and 2 inch spring spacers on my Tahoe, what size shocks do I get? I’m looking at pro comp shocks, but I don’t know what size I should get. Any recommendations on shocks and the part number of them?

 

[Colby_e32]

You did 3” spindles in the front and 2” spacers in the rear right?

Personally I’d get Bilstein 4600’s or 5100’s. Keep in mind the spindles do not change the length of the shocks. So a factory length shock will work fine.

 

[03tahoe5_3]

Yes I plan on doing that. So factory length in the front and what length shock in the back?

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.

 

[03tahoe5_3]

 

[1badjimmy]

That thing is clean. I didn’t think I would like the look of a lifted Tahoe. But yours is nice.

Bilstein’s website doesn’t show a shock for a 2” rear lift. Just 0-1 and 3”.

5100 series shocks
0-1 PN - 24-187237
3” PN - 24-185783

Hope that helps.

 

[03tahoe5_3]

That thing is clean. I didn’t think I would like the look of a lifted Tahoe. But yours is nice.

Bilstein’s website doesn’t show a shock for a 2” rear lift. Just 0-1 and 3”.

5100 series shocks
0-1 PN - 24-187237
3” PN - 24-185783

Hope that helps.

I’m not lifted at all… yet. But I just stuffed some 33’s which helped with ground clearance. But I will end up having 3” of lift in the back so thank you!