Nearly 4 years later, my 2001 Team DC Audio build

[Tonyrodz]

As I baked the housing and got lens back on I realized the shroud and front of the projector lens were ever so slightly touching the housing lens. ​

I didn’t get a picture of it last night because I was pissed at that point. After work today I calmed down and cut the h4 adapter plate off, repositioned everything with the lens still glued on and I think it should be good now! Was able to get the projector away from the lens just enough. Now have to wait till later tonight so I can find a place to fully aim them correctly. They look killer though I’m super happy View attachment 236916View attachment 236917View attachment 236918View attachment 236919View attachment 236920

Cool AF!!! I'm liking it. Great job man. Wish I had the patience for that.

 

[Thatsquishykid717]

Cool AF!!! I'm liking it. Great job man. Wish I had the patience for that.

i wish I did too bahaha but thank you!

 

[Thatsquishykid717]

And @Sam Harris yes it was worth it after seeing the output


low beams in mall parking lot
High beams

Low beams on a country road
And high beams

 

[Tonyrodz]

And @Sam Harris yes it was worth it after seeing the output

View attachment 236936
low beams in mall parking lot View attachment 236940
High beams
View attachment 236937
Low beams on a country road View attachment 236938
And high beams View attachment 236939

Really, really nice.

 

[Thatsquishykid717]

Got a interior led light setup for a early Christmas present. Strip led lights that have solid colors or a couple different light to the music style. Put two in between my amps and one on driver and passenger footwell even though I already have the factory lighting for there. They are nice for light but we will see how long they last because bass seems to break everything lol.

 

[Thatsquishykid717]

Today I made my demon eyes permanent. I had them hardwired and was just unhooking the ground when I wasn’t taking pictures. Soldered an extension onto the xbt controller since they give you maybe a foot to work with
Wish I still had tech flex laying around to cover that wire but that can be fixed later. I have my fog light relay harness Connected in the under hood fuse panel for my constant. And my dual alternator relay setup is directly behind the fuse panel running into the cabin to a fuse ignition +. When I’m at audio shows I’ll be parking it with the demon eyes on during the show/while I compete. I usually leave my windows down halfway and hood popped when it’s parked so I didn’t want to have my keys in the ignition for the demon eyes to work. Decided to make the positive wire have a male spade terminal and put a female t tap on both constant and ignition wires. So it’s connected through ignition + normally and at shows I can switch it over to the constant power in the fuse panel.
Also went to the casino on Christmas eve and grabbed some night shots in the parking lot and in a parking garage on my way back home.

 

[Thatsquishykid717]

 

[Sam Harris]

View attachment 237292View attachment 237293View attachment 237294View attachment 237295View attachment 237296

Damn man, good work! That looks so good!

 

[05Single]

Looks good dude. I should be getting my parts in 2020

 

[Thatsquishykid717]

Looks good dude. I should be getting my parts in 2020

I really hate that you called that back right after we both ordered for black Friday. It was funny at the time but now it’s not as funny you just need to get the damn parts already. Lol. My buddy just ordered a set of 7.0s that I get to help retrofit in his Tacoma. See how long they take to ship out.