Goodinblack
I Like Tacos
Rust bad?
My Yukon SLT
- Thread starter YuCanada
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
YuCanada
Full Access Member
Very. I still haven't gotten the rotors off..
- Joined
- Jan 3, 2011
- Posts
- 50,933
- Reaction score
- 19,329
Get a BFH
OP
OP
YuCanada
Full Access Member
Will have to go get one after hockey tonight. Passenger rear has moved 1/8 and driver side hasn't budged
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Does BFH mean what I think it means?
- Joined
- Jan 3, 2011
- Posts
- 50,933
- Reaction score
- 19,329
BFH = big friggin hammer
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
I was basically right lol
Goodinblack
I Like Tacos
Its a gm j-tool
Lol
Lol
- Joined
- Jan 3, 2011
- Posts
- 50,933
- Reaction score
- 19,329
Did u get the rotors off, David?
OP
OP
YuCanada
Full Access Member
What is that
---------- Post added at 08:20 AM ---------- Previous post was at 08:20 AM ----------
No I was way too tired after hockey tryouts last night lol.
OP
OP
YuCanada
Full Access Member
There nothing special to remove right?
Just take off the calipers and should be able to pull off? No hidden bolts? Just feels like I'm missing something because its so stuck
Just take off the calipers and should be able to pull off? No hidden bolts? Just feels like I'm missing something because its so stuck
Goodinblack
I Like Tacos
The rears?
They have the parking brake mechanism inside the drum.
They have the parking brake mechanism inside the drum.
OP
OP
YuCanada
Full Access Member
- Joined
- Jan 3, 2011
- Posts
- 50,933
- Reaction score
- 19,329
He shouldn't have drums, Lee....
Spray the lug bolts and rotor in penetrating oil and let it sit for a bit to help it break the rust loose. Then take your BFH and wack the rotor.
Spray the lug bolts and rotor in penetrating oil and let it sit for a bit to help it break the rust loose. Then take your BFH and wack the rotor.
OP
OP
YuCanada
Full Access Member
Well guys, I found out the easiest way to get seized rotors off!
The two holes on the front face are threaded with the same size as the bolts for the calipers.
If it doesn't push it all the way off then go to the store and buy longer ones. Worked so easily I feel so dumb for not trying earlier.
Rusty as Fk!
Shiny
Here's why one of my rotors was so loud. I think the rotor went bad which caused the pad to use up really quick to the point that there was no pad left lol.
The two holes on the front face are threaded with the same size as the bolts for the calipers.
If it doesn't push it all the way off then go to the store and buy longer ones. Worked so easily I feel so dumb for not trying earlier.
Rusty as Fk!
Shiny
Here's why one of my rotors was so loud. I think the rotor went bad which caused the pad to use up really quick to the point that there was no pad left lol.
Goodinblack
I Like Tacos
1000X better
OP
OP
YuCanada
Full Access Member
Finally got the truck today!
On delivery:
30 minutes later, leveled and new tires on:
On delivery:
30 minutes later, leveled and new tires on:
Goodinblack
I Like Tacos
Look great.
Huge difference
Now go and detail it
Huge difference
Now go and detail it
Similar threads
