my 2002 tahoe build

[Tahoewhat]

Looks, sounds like crazy build, but looking forward to pics..

 

[dy_lon]

Awesome idea for the fuse block. Im going to look into building a similar fuse block, but for my lighting!

 

[BlackLac]

4 alternators!

 

[flashlight_65]

i got some old pics that i didnt get to put cause my sd card reader shit the bed on my laptop.

heres of the alts when installed them
1

2

3

4


more of the interior



---------- Post added at 11:39 AM ---------- Previous post was at 11:39 AM ----------

second skin
2 layers on the roof

1 on the floor on the flat ares 90% coverage and rcas and 12g stinger wire under the carpet for the doors and wire ran for the a-pillars and kick panels for the future


hids and clear headlights/signal lights


before

after

 

[flashlight_65]

headunit before



bluetooth








---------- Post added at 11:42 AM ---------- Previous post was at 11:41 AM ----------

some equipment
100' 1/0 kolossus flex and 8g, fuses and a ton of ring terminals




buss bars i drilled out but the metal is too thin so i got some 3/4" thick on the way

 

[NoPh33rRaCiNg]

Shoot if you come out here I want to hear this for sure. Question though, where'd you get your ring terminals from? I got a guy on CA and CACO with some but if you've got another source that maybe is cheaper lemme know.

 

[flashlight_65]

this is where i got mine
http://www.darvex.com/store/pc/view...p&ProdSort=1&page=2&idCategory=22&viewAll=yes
but i got the ones for my caddy here
http://www.thenerds.net/METRA.METRA_Gold_Ring_Terminal.GRT3.html?affid=4

---------- Post added at 12:38 PM ---------- Previous post was at 12:28 PM ----------

Damn, lookin good. Do you have anything else planned for mids and highs

thank you, i already have the infinity kappas for the doors but still undecided about the a-pillars and kick panels (maybe cdt or rainbow comps) as for power an rf t600.4 for the infinity's and a t400.4 for the others

---------- Post added at 12:42 PM ---------- Previous post was at 12:38 PM ----------

Those alts are sexy, and that fuse block is badass. Where do I get one?

As thehoe92 said i just one of the BTL's. The box build starts tomarrow. WOOT

i built the fuse block using an old pelican case, grommets, spray painted some framing brackets and some nuts,bolts and lock washers. good luck on your build

 

[flashlight_65]

anyone have experience using sketch up? if you guys can help me out im thinking subs up port back with the slot kerfed and centered the max dimensions are 48w x 21h x 22d for 10 cubes tuned to 32hz. any help wou;d be appreciated

 

[flashlight_65]

Well the box is built. Now I'm working on a new build for the next step

built it in my room


getting the kerf lined up


making it strong


rounding over the corners


---------- Post added at 11:30 AM ---------- Previous post was at 11:20 AM ----------

Seperating the chambers


cutout the holes and test fit


Filled in the screw holes, sanded, glassed/45'ed all the corners

sprayed the port with splatter paint


---------- Post added at 11:41 AM ---------- Previous post was at 11:30 AM ----------

Wrapped and ready to load. Just needs some finishing touches
4.75 cubes after displacement tuned around 32hz








---------- Post added at 11:46 AM ---------- Previous post was at 11:41 AM ----------

What do you guys think for a temp box and first time kerfing wood? I think it cane out all right.

 

[mrtrill]

camp lejeune....damn thrill seekers!!!
lol...im sittin up here lookin @ all those wires n stuff,
its not even mines & im cringing.

great diy though, sum of yall b gettin to it!


by the way...how much amperage does a stock altenator put out??
mines is starting to lose it...I have 2 yellowtops and it was puttin out a steady 14 volts with a 3000 rms draw,
now even without any of the 3 amps installed, that sucker will drop down to 9 volts.