Lowering Kit Help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

escahoe07

Member
Joined
Mar 27, 2012
Posts
54
Reaction score
23
So I had a 2/3 Eibach coil drop on my 07 tahoe, I replaced the stock strut and eibach coils with a monroe quick strut assembly for the front, and installed a 2/4 spindle/coil drop. Now that I put the wheels back on the rear looks okay, not much lower than before but the front is horrible! It is sitting about 3.5 inches higher than it was when I had the 2" springs, and the wheels are bowed out on the top. Any suggestions on what could be going on? I'm sure and alignment could fix the wheel camber/toe but why would it be 3.5" inches higher??
 

lx4life

Full Access Member
Joined
May 14, 2011
Posts
155
Reaction score
0
what brand 2/4 kit?

---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------

also which monroe quick strut did you get? Cause you might of gotten the quick lift struts instead of the quick struts complete assembly.
 

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
605
lower spring perch flipped upside down
 

Forum statistics

Threads
129,375
Posts
1,814,937
Members
92,550
Latest member
k09viper

Latest posts

Top