Looking for ideas from sub box behind 3rd row seat 07 Tahoe

[FINALTOUCHFRI]

I'm looking for a serious box custom or not to go behind my 3rd row seat 07 Tahoe LTZ. I want it to hit hard. Any ideas or pics?

 

[FINALTOUCHFRI]

I'm looking for a serious box custom or not to go behind my 3rd row seat 07 Tahoe LTZ. I want it to hit hard. Any ideas or pics?

No one has a custom box behind their 3rd row seat?

 

[89Suburban]

I have one of these. It hits pretty hard but only at real low frequencies.

https://www.crutchfield.com/S-aDBvU...AfhEblzngQh9jOjcyFssnIK6rkcY2N3QaAg8eEALw_wcB

 

[Joseph Garcia]

I have a custom, downward-firing sealed sub enclosure with an Audiomobile 10" sub between my 2nd row captain's chairs, but it is movable to anywhere in the truck. I power it with a 500 watt RMS Rockford Fosgate amp installed inside the truck's rear side panel. One of my dogs also uses it as a seat, when we are driving down the road (hence, all the dog hair).

I wish you the best of outcomes on your sub project.

 

[FINALTOUCHFRI]

Not bad, looking to put something custom behind third row that's going to hit REAL hard. I already have two amps installed under the second row seats. 1- 1K watt MONO Fosgate amp and 1-800 watt 4 channel Fosgate. Just haven't found the box box that hits yet. I may have to go to a local shop for a custom box. Just looking for ideas now. I want to be able to disconnect the box when I need to take the seats out.

 

[Tonyrodz]

Not bad, looking to put something custom behind third row that's going to hit REAL hard. I already have two amps installed under the second row seats. 1- 1K watt MONO Fosgate amp and 1-800 watt 4 channel Fosgate. Just haven't found the box box that hits yet. I may have to go to a local shop for a custom box. Just looking for ideas now. I want to be able to disconnect the box when I need to take the seats out.

When I installed my box, I wired to the amp with a trailer wiring plug. The style that you can unplug, for the times I needed to take it out.

 

[FINALTOUCHFRI]

My system has 2 gauge pwr wire ran straight to the battery with the amps mounted under the second row seat. That's a good idea for my speaker box!!!

 

[Tonyrodz]

My system has 2 gauge pwr wire ran straight to the battery with the amps mounted under the second row seat. That's a good idea for my speaker box!!!

Has saved me many a headache.

 

[Joseph Garcia]

If you have a 1KW monoblock amp, you may want to use a higher amperage connector for your speaker wires, to ensure that peak amperage output surges from the amplifier get to the sub with minimum resistance. I have used these high amperage connectors for many applications, and they are quite durable and compatible with thick electrical cables. I picked them up on Amazon.

 

[Meccanoble]

you can get a shallow box that will fit behind 3rd row. I have a Hertz sub that hits even though its a bit shallow.

 

[FINALTOUCHFRI]

Saweet!!!

 

[2muchspl]

Here is a pic of my 3rd row box I built for my 09', Escalade not the greatest Ive done but it not bad.
2- 12" P3 and DC Audio 1.2K, Android 10.4 headunit

 

[89Suburban]

Here is a pic of my 3rd row box I built for my 09', Escalade not the greatest Ive done but it not bad.
2- 12" P3 and DC Audio 1.2K, Android 10.4 headunit

Gawd Damn!!!!!!!

 

[2muchspl]

Takes bow

 

[SOCALIGUY81]

I'm looking for a serious box custom or not to go behind my 3rd row seat 07 Tahoe LTZ. I want it to hit hard. Any ideas or pics?

I squeezed 2 15" CVRs behind the 3rd row in custom sealed boxes and it was perfect.

PS This is my Tahoe from the "2007+ Add Sub To Tahoe" sticky thread ; )

New email is [email protected]

 

[FINALTOUCHFRI]

Nice!!!!

 

[89Suburban]

Dayumm!!!!

 

[B2sdad]

Not a Tahoe, but behind the 3rd row... you get the idea!

 

[Slurpglass]

https://www.netaudiowf.com/# has what you want. I’ll be ordering a custom one from them for my JL Audio 12W7


Sent from my iPhone using Tapatalk

 

[FINALTOUCHFRI]

SAWEET SITE