Looking At New Rims Have A Question

[neosoul]

I am looking at purchasing new rims but don't like how some vehicles rims looki wider on the front than the rear. So I was looking at getting 16x8 for the front and 16x9 or 16x10 for the rear. What do you guys think and will I run into any type of problems doing this. By the way my truck is 4 wheel drive if that matters at all

 

[SunlitComet]

Just match them all around.

 

[neosoul]

already have a matched set of rims all around and I dont like the look as the front seems to stick out a little further than the rear. not much but just slightly. I dont want to have the same problem when I buy my new rims which is why I was curious if anyone has put a slightly wider rim on the rear than the front

 

[00'BlueSteel]

they make 1/4" spacers, you could bring the rear out to match the front.
http://www.summitracing.com/parts/gor-sp603?seid=srese1&gclid=CPnr9OmjisYCFRMkgQodQYwA7Q

If no, the answer is yes you can run different widths. The problem on a 4x4 is you need to get the tires when mounted on the wheels to be the same height.

Find a good wheel and tire shop and they should be able to help you figure it out.

 

[jerryjoe28]

front wheels are out farther? is your truck lifted?

 

[neosoul]

no its not lifted, currently I have 265/75/16 on the truck