Installing rocker switches...

[the big blue bus]

yes that piece my friend

 

[99Yuk]

sorry to bring old thread back but how well do the switches stay put in there all nexdt to eachother?

Good question.
The switches on the right already in the blank are snug with little play.
The ones not installed yet on the left are too loosy goosy for my tastes.

That's because when I dremeled out the left first then dremeled out the right. I just made the first hole on the left too big.

That being said, they are not falling out, they don't move when hitting bumps. they don't rattle or anything. They are just not super snug.

 

[the big blue bus]

im planning to do that with 4 switches if i can ever find the console blank first

 

[SunlitComet]

gm 15737207

It is getting hard to find.

 

[the big blue bus]

guess its time to hit up junk yards. i just dont think i could make a piece tat would look as good and look facotry

 

[the big blue bus]

found some from fsc. should i go with a gray one or black? my console it grey and black i have no fabric on it. i think the black would look kinda cool 2 tone or just the grey with black switches

 

[SunlitComet]

gray plate so you have contrasting color between parts. Aids in non-direct visual actuation.

 

[the big blue bus]

grey i shall get. ya think 18 shipped is reasonable? ive been searching for one forever

 

[96ProCompTahoe]

wow $18 shipped? i'll start snatching these up in the yards when i up there

they didn't charge me for the 2 i picked up a while back. have to pick up some more.

 

[the big blue bus]

i cant find any obs in yard and the ones i do are the ugly 94 down and no consoles or anything left. do you have an extra layin around?

 

[SunlitComet]

Get it and be done with it.

 

[the big blue bus]

aight i will and ill post up pics once i get everything

 

[the big blue bus]

the console piece is comming in mail. going to wait till after xmas to install need the other switches before i cut it up and finish it all

 

[Done Deal DR]

Does anyone know where I can find the bolt/screw that attaches the console at the front? I have a console I bought a while back but haven't been able to find the proper hardware yet.

 

[SunlitComet]

if you mean roof console in front near windshield.

 

[the big blue bus]

i just got one of those like white clips that cliped into the roofs square hole and super gluded it so it wouldnt come out and used the screw i got with the console. theres a metal clib that clips in there from the factory but when i was taking mine out we lost it in the roof

 

[billowred]

Thanks guys!

Here's what they look like mounted up...

I still say they look like pure sex...

F'ing awesome!

 

[Done Deal DR]

if you mean roof console in front near windshield.

Yeah that's what I mean.

 

[SunlitComet]

Sorry DDDR I cut the message short. Look for a vertical hole in the front of console near the mirror. believe it was a #2 Phillips bit.

---------- Post added at 10:38 PM ---------- Previous post was at 10:37 PM ----------

Oh and get ready to catch.

 

[Done Deal DR]

Sorry DDDR I cut the message short. Look for a vertical hole in the front of console near the mirror. believe it was a #2 Phillips bit.

---------- Post added at 10:38 PM ---------- Previous post was at 10:37 PM ----------

Oh and get ready to catch.

That's what I'm saying, I think I'm missing that in the first place. I'm looking where to buy that hardware.