Gas pedal start/stalling

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bacongurl10

TYF Newbie
Joined
Jul 16, 2025
Posts
2
Reaction score
0
My 97 chevy tahoe has stalled when coming to stop. Starts cold perfectly. But once hot dosent want to start. Pressing the gas pedal down can get it to start, idles rough. I have replace the crankshaft sensor, iac sensor, throttle position sensor. Have test fuel pressure and thats fine. Any ideas?
 

Eman85

Full Access Member
Joined
Apr 18, 2021
Posts
611
Reaction score
1,004
Check engine light work? Is it on at any time? Any stored codes? Can you read data? If you want to keep firing the parts cannon try the coolant temp sensor.
 

Joseph Garcia

Elite Member
Supporting Member
Joined
Aug 2, 2018
Posts
10,267
Reaction score
14,870
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.
 

exp500

Full Access Member
Joined
May 14, 2017
Posts
2,016
Reaction score
1,965
Start with distributor cap and rotor. United DCR -820X or Delco /Delphi only. NGK or AC plugs. Fuel filter.
Question- What was Fuel Pressure and how was it tested?
I like using FP Gauge on 6 foot hose so I can read on test drive Scaning live data at same time.
 

Forum statistics

Threads
137,671
Posts
1,989,105
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top