Front seat comparison within the Gmt900 years

[5strmtrp]

The new to me ‘13 Suburban needs a driver seat. The seat frame on it is twisted up bad. AZ3 RPO code. Am I safe by looking for one from a 2011-13 of any GMT900? The cushions & covers are in fantastic shape.

 

[07burban88]

i think there the same 07 to 14 if ya just need the track/frame

 

[swathdiver]

The new to me ‘13 Suburban needs a driver seat. The seat frame on it is twisted up bad. AZ3 RPO code. Am I safe by looking for one from a 2011-13 of any GMT900? The cushions & covers are in fantastic shape.

Just get a new seat track. Use your VIN and RPO codes at GMPartsGiant to see which one you need. I learned that even my pickups use the same track after I thought they were different.

 

[5strmtrp]

If I had that type of free cash I would have.

 

[5strmtrp]

i think there the same 07 to 14 if ya just need the track/frame

So picked up a seat yesterday tracking frame and wiring harness are the same except for the airbag connector 2011 and older have a different type of connector. I’m hoping to just swap out the connector from my busted seat onto the new seat and call it done.

 

[opfor2]

So picked up a seat yesterday tracking frame and wiring harness are the same except for the airbag connector 2011 and older have a different type of connector. I’m hoping to just swap out the connector from my busted seat onto the new seat and call it done.

Would swapping the airbag connectors be just a matter of splicing the new to the old? Same wire colors?