Anything EXCEPT an 07-09. Mines out of a ‘12.
Escalade Cluster in NNBS!
- Thread starter fiatdale
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
5StarG3neral
TYF Newbie
- Joined
- Jul 4, 2021
- Posts
- 26
- Reaction score
- 13
Yup I'll be sourcing one hopefully locally and swapping them out
Doug118
Full Access Member
- Joined
- Sep 22, 2012
- Posts
- 558
- Reaction score
- 1,052
Do a little research because I’m not 100% that 2009 was the last year they didn’t have oil or voltage. I just know mine came from an 08 and does not have it. Or just try to buy 12-14 since we know from Rocketman that the 12 has it for sure
5StarG3neral
TYF Newbie
- Joined
- Jul 4, 2021
- Posts
- 26
- Reaction score
- 13
I pulled up the owners manual for each year. The 07-08 do not have the oil pressure or voltage readings. 09 and up all have it. I've sourced one from a 2012 that I'm picking up tomorrow and throw it in over the weekend to see if this works. I also noticed the 07/08 clusters dont have the outside temp reading or the compass.
I don’t know what GM was thinking there. Good luck, sounds like you have it figured out. And I learned something new.
Doug118
Full Access Member
- Joined
- Sep 22, 2012
- Posts
- 558
- Reaction score
- 1,052
Hopefully the plugs are the same. Don’t see why they’d change them but GM has done dumber shit than that
07-08 didn’t have DOD so they probably knew they wouldn’t have oil issues
5StarG3neral
TYF Newbie
- Joined
- Jul 4, 2021
- Posts
- 26
- Reaction score
- 13
**Update** Got the 2012 cluster in and now have my oil pressure, voltage, compass, and outside temperature all displayed.
Weird thing I noticed even with the 07 cluster in was my engine temp gauge. I find it dips down at idle at times down to 0 even though I'm at full operating temp. I start moving she it climbs up to where it should be.
Any ideas? Everything else on the cluster functions 100% as it should and I've checked all of my connections multiple times.
Weird thing I noticed even with the 07 cluster in was my engine temp gauge. I find it dips down at idle at times down to 0 even though I'm at full operating temp. I start moving she it climbs up to where it should be.
Any ideas? Everything else on the cluster functions 100% as it should and I've checked all of my connections multiple times.
Sender unit maybe. That’s all I got.
ArrivalPPV
TYF Newbie
- Joined
- Apr 12, 2021
- Posts
- 2
- Reaction score
- 0
How did you make it?
I’m about to have to re-solder the cluster in my 07 for a 3rd time and at this point I may just do an Escalade one. Anyone who has a dash bezel they’d be willing to sell as well as harness, I’m happy to buy. Hell maybe if I can get a clean bezel I’ll take it to a few local plastic molding places and see the cost of copies.
Hey bro Dave here. Are you still making these? I would love to buy one send it to you however this works bro! This is so badass!
Hi did you ever get the part number? I have the escalade pigtail and im trying to build my own harness also but been looking for weeks cant figure out the connector part number its driving me crazy thanks in advance.
Hi Steve do you have the part number for the connector to make the plug and play harness i have the escalade pigtail thanks
I don’t have the part number but the member who sold me the one I used to make my harness told me they’re not available anymore. Maybe you can get one from a wrecking yard or hard wire to the Escalade connector.
Thanks for getting back to me i think S20B-AIT2G-2A2BK might have been the part number but dont think they make it anymore which stinks i was hoping to not have to cut off my chevy plug so i can switch back easy.
67RS427
Full Access Member
- Joined
- Apr 5, 2017
- Posts
- 595
- Reaction score
- 1,217
I had trouble finding the correct part as well, this might help though since you can just splice right into the old one...
Thank you, yea thats my last resort wanted to be able to swap between clusters so trying to figure out some sort of plug option
67RS427
Full Access Member
- Joined
- Apr 5, 2017
- Posts
- 595
- Reaction score
- 1,217
I've tried before but you can also try to contact https://www.mouser.com support and see if they can help. Give them the connector number on that picture and see if they can find the other end of it. Their support is pretty good...
Thanks for all your help i did contact them a few weeks ago they are very nice and helpful. Think we came to the conclusion that the part was only made for a short time and is not produced any longer. I also contacted jst who we think made the plug they sent me something from japan but it wasnt the right part.
