Enable video in motion without lock pick

[Slade]

Hey guys, anyone out there know how I can enable DVD in drive (for passenger of course) without spending an arm and leg on a lockpick? I saw a post (I can't remember where) where a guy with a terrain disconnected the VSS wire via toggle switch (or something along those lines). I do remember that he did it via toggle because the GPS location would stop updating as if the truck was stopped when the switch was flipped but he had video. Pretty simple, switch on, DVD… switch off, navigation. Anyone have any experience, ideas, comments, suggestions, etc??

 

[whoseanthony]

There is no lock pick for the 2015+ yukons. you need to get the HMI flashed and then video in motion works, nav entry etc.....

The switch you refer to was used primarily on aftermarket models and all it did was ground the parking break wire to enable video in motion.

 

[Slade]

There is no lock pick for the 2015+ yukons. you need to get the HMI flashed and then video in motion works, nav entry etc.....

The switch you refer to was used primarily on aftermarket models and all it did was ground the parking break wire to enable video in motion.

I actually have a 2009.

---------- Post added at 10:23 AM ---------- Previous post was at 10:16 AM ----------

Ok, I found the post again... its the 7th reply on this forum...
http://www.acadiaforum.net/index.php?topic=5235.0
After reading it again, I noticed that this will NOT enable dvd in drive, only address entry in drive on the nav screen.
Sooooo...any ideas anyone? lol

 

[whoseanthony]

I actually have a 2009.

---------- Post added at 10:23 AM ---------- Previous post was at 10:16 AM ----------

Ok, I found the post again... its the 7th reply on this forum...
http://www.acadiaforum.net/index.php?topic=5235.0
After reading it again, I noticed that this will NOT enable dvd in drive, only address entry in drive on the nav screen.
Sooooo...any ideas anyone? lol

Sorry you posted in the wrong forum. Might have better luck posting in the proper year

 

[Slade]

Sorry...noob here, my 4th post.

 

[NathanJax]

Moved from 2015 to 07-14

 

[caddythis]

Following

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[rcg703]

I have a used lock pick I could sell you...it's all complete and just took it out today. PM me if interested.

 

[caddythis]

I have a used lock pick I could sell you...it's all complete and just took it out today. PM me if interested.

I'm not sure how to pm I'm new to this could you please pm me first?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[rcg703]

PM sent