Devastated...electrical issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mossy oak

Member
Joined
Apr 4, 2017
Posts
37
Reaction score
2
Hey guys I just bought an 04 suburban and everything was ok but now the seat adjustment is backwards sometimes, mirrors fold but adjust intermittently, seat heaters flash intermittently, rear DVD isn't working (disk format error), AC blows hot in drivers side sometimes (blend door actuator?)etc
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,918
Reaction score
14,578
Location
Chicago
Hey guys I just bought an 04 suburban and everything was ok but now the seat adjustment is backwards sometimes, mirrors fold but adjust intermittently, seat heaters flash intermittently, rear DVD isn't working (disk format error), AC blows hot in drivers side sometimes (blend door actuator?)etc

Check all grounds.
 
OP
OP
M

mossy oak

Member
Joined
Apr 4, 2017
Posts
37
Reaction score
2
How many and where are they? I know about the one behind the engine that usually gives problems. There are more?
 

mwilson62000

Senior Member
Supporting Member
Joined
Jan 20, 2015
Posts
428
Reaction score
1,404
Should be two together on the frame under the drivers door and one under the front bumper just inside the drivers fog light.
 
OP
OP
M

mossy oak

Member
Joined
Apr 4, 2017
Posts
37
Reaction score
2
Oh well...it didn't work. Thank y'all yall trying to help! Any more suggestions?
 
Last edited:

wingdog

TYF Newbie
Joined
Oct 24, 2016
Posts
11
Reaction score
13
My seat switch worked backwards and I found a GM bulletin dated May 26th, 2005 addressing the issue. It's a software update for the driver seat module. Document ID 1665575. Worked for me.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
45,011
Location
Li'l Weezyana
I'd clean the contacts in the seat and mirror adjuster switches. Another member recently fixed his seat adjuster by doing this. The mirror switches needing to be cleaned is a common issue and the seat switch failing for the same reason makes sense. Switches that aren't used so often get like this because using them helps to keep the contact points inside them clean. Maybe we should all make it a weekly thing to sit in our cars (they don't need to be on or running for this) and work all the switches that we don't use so often.

*Edit*
I missed the detail about the seat operating backwards. At least you have a explanation, thanks to Kevin!
 

jaywoo65

Full Access Member
Joined
Mar 28, 2017
Posts
143
Reaction score
178
Location
Cabot, AR
My seat switch worked backwards and I found a GM bulletin dated May 26th, 2005 addressing the issue. It's a software update for the driver seat module. Document ID 1665575. Worked for me.

Well heck. My yukon seat is working backwards also. Push the switch to go towards the steering wheel and it goes back. I just figured whoever had it before me jacked with the wires and put it together wrong. I guess I need to swing by a dealer and see what it would cost to have it updated.
 
OP
OP
M

mossy oak

Member
Joined
Apr 4, 2017
Posts
37
Reaction score
2
So I cleaned the contacts. Mirrors work now. Removed harness from blender actuator til I can replace. SEat heater only works if seat is being adjusted at the same time. Guesss I have the software issue as well. Wish DVD player was working. Also lucky me there's a cd stuck in cd changer
 

wphtexas

TYF Newbie
Joined
Feb 9, 2011
Posts
10
Reaction score
0
Location
TX, CO
Had similar issues. Lost driver preferences. Constantly alerting that the rear access door was open. Alarm went off randomly. Periodically AC wouldn't blow cold, did blow hot, then changed to cold. Back and forth. Traced things to the BCM. Bought a new one for $70 on Ebay and had the dealer install and program. My 2003 Z71 back and fixed.

Wayne in Austin, TX
 

Forum statistics

Threads
137,724
Posts
1,990,494
Members
102,714
Latest member
briannorris
Back
Top