Complete Lighting/LED List

[qlc1964]

you mean dismantel the l.e.d out it's holder?

did you get the hid kit or the whole head light?

 

[haks310]

No no, Usually in the HVAC the bulb and its holder are one piece, you would replace this piece with the T1.5 leds.

Now sometimes the bulb and the holder are different pieces. You would have to take the bulb out the holder and put in a 74 type led bulb.

I know superbrightleds carries the T1.5s and th 74s

I have te TYC headlights with the hid kit.

 

[qlc1964]

i was able to get them small hvac bulb out using some pliers

to pull the bulb out i will go to superbright web and order some

and go and pick them up. and some brighter 194 l.e.d's

 

[mikeykey]

Does anyone know how many bulbs are in the AC controls up on the overhead front console that controls the rear air?

Also, I realize after reading several threads that the 5 bulbs in the 4x4 switch will need to be soldered in. What type of bulbs are needed though?

Almost down with the front dash. I tried the white LED thing haks (don't get 6k white LED's, it comes out too blue) but am switching to all blue. Your list needs some updating!

Also, are these the type of T1.5's i need? :http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&next=50#T1.5-A-N

 

[haks310]

Don't have rear AC but I am guessing they would be T1.5s also. Take it down and see what is going on behind there. LoL when I did the LED swap all they offered where the 6000K LEDs, they are slowly starting to offer 5000K now though. Why the switch to all blue now? I can't recall what type of bulb the 4x4 switch will need, TGB asked the same question a while back and I answered him, hopefully he remembers, if not I will try digging it up for you.

Yeah you will need the T1.5 Instrument LEDs

 

[TahoeGoBoom]

The 4x4 were soldered. I was gonna take apart neo3s to do it iirc. never got around to it. all my money keeps gettin dried up elsewhere.

 

[haks310]

It is 5 of them, am sure you can solder any type of LED in there. 74s should work.

2 come on when you turn the parking lights on, the other 3 are for when the 4x4 is on.

 

[AtomicHoe094]

what about the fog, hatch and defrost LEDs? on every button they are gone out and i cant see shit when im driving, id loveee to put some in there. itd make a hella difference

 

[Kon-Man]

CAN SOMEONE HELP MAKE A LIST LIKE THIS FOR YOUR 07 AND UP BROTHERS?

THANKS IN ADVANCCE

 

[mikeykey]

In Seinfeld **** voice :::::“No LED list for you!!!!”:::::

 

[haks310]

what about the fog, hatch and defrost LEDs? on every button they are gone out and i cant see shit when im driving, id loveee to put some in there. itd make a hella difference

Would think these need soldering also similar to the 4x4 switch.

CAN SOMEONE HELP MAKE A LIST LIKE THIS FOR YOUR 07 AND UP BROTHERS?

THANKS IN ADVANCCE

Hmmm, maybe I could do one when I go to Arizona, parents have an 07 also. No promises though. Isn't there a couple guys in the NNBS section that have done LED swaps?

In Seinfeld **** voice :::::“No LED list for you!!!!”:::::

LMFAO

 

[TahoeGoBoom]

I'll make a list if someone volunteers their 07+ to me for a week. lol.

 

[AtomicHoe094]

Would think these need soldering also similar to the 4x4 switch.

You know if those would be the 74s too? i think theres 2 bulbs in each switch, one for if its on or not then to display the name of the switch..

quick question. Does your knob for the headlight switch light up like how the HVACs are? is there a separate bulb for the knob compared to the switch itself?

 

[mikeykey]

I offered him $220 and he took it also. The only reason I didn't go lower is Haks previously said he would take $220 so I just went with it.

For the money, I'd say they are worth every penny. I love them!. Just last night, i set my nbs hoe next to my obs hoe and can't beleive the difference. Especially with the new LED parking light and lighted side reflectors!

 

[haks310]

Would think they are.

Yeah, lights up the same. I only seen the NEO4 bulb in there. Didn't open up the switch completely so I wouldn't be able to tell you if there is a bulb soldered in there also.

 

[Kon-Man]

Lol on the seinfeld crack.

People have done swaps but no list like yours.

Wheres the best place to find leds?

 

[haks310]

Oh alright, I'll see what I can come up with tomorrow.

I personally like vleds.com

 

[mikeykey]

I personally like vleds.com

Same here, I just wish they carried all the neo wedge bulbs and t1.5's.

AWESOME customer service though.......If only Comcast had the same.

Why the switch to all blue now?

I put the white bulbs from v-led's in there and its got too much blue tint to it ans it's a little to bright......I also gave up on my "painted" white needles becuase once I painted them, I couldn't get them to light up like stock. Plus, when I put the needles back on, they are a bit off and don't smoothly move anymore. I guess i moved them alittle and pushed them down too hard.

I figured when I get me esky cluster in, i'm not going to EVER take off the needles again. So sanding off the blue backing plastic is out of the question. With all that, I just gave up and figured i'd do all blue. More power to you though, I can't keep up.

 

[mikeykey]

I just took out my a/c controller and ended up breaking both tabs that hold it in.......f-ing great. Anyone know where to get a new one cheap?

I looked at the a/c controller in the overhead and think i might have to take the entire overhead console down to access the unit. Anyone ever done this?

---------- Post added at 08:04 AM ---------- Previous post was at 07:13 AM ----------

 

[AtomicHoe094]

I just took out my a/c controller and ended up breaking both tabs that hold it in.......f-ing great. Anyone know where to get a new one cheap?

since you have broken tabs, sell it or buy that kit for the double dins!!!

or ill sell you mine for yours