comp cams roller tip rockers 1.6 used

[SunlitComet]

bought these for my vortec 350 but the 1.6 requires the head push rod hole to be enlarged and i was not going to do that to new heads when i had to get it back together real fast. i have since gotten the 1.52 so i don't need these. about 30,000 miles on them i believe. these are for a 3/8 stud self aligning type valve train. you will need you own pivot balls and i recommend new nuts as well.

$65 shipped priority mail.

 

[SunlitComet]

Things that go bump in the night.

 

[Nbs]

I have an 04 Escalade, do you know if these will work in my motor? I will google it and look it up myself after work

 

[SunlitComet]

you will have to call comp cams with the vehicle engine type and size. I do not know what engine you have.

 

[Nbs]

Do you have a model number?

 

[SunlitComet]

hold on.

---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------

http://www.compperformancegroupstor...oduct_Code=1418-16&Category_Code=SBCNEWRocker

 

[SunlitComet]

Things that go bump in the night. Again.

 

[SunlitComet]

Things that go bump in the night. Again.

 

[SunlitComet]

Things that go bump in the night. Again.

 

[SunlitComet]

Things that go bump in the night. Again.

 

[Blazed]

I thought you werent supposed to use used cam shafts?

 

[SunlitComet]

these are rocker arms not camshafts. and given the construction of them they can be reused. they only have about 30,000 miles on them. they are not the flimsy stock 1.46's.
sm says if they have no scoring no excessive wear they can go back into an engine that has been torn down. so slightly used rockers with no scoring or excessive wear in a used engine works just fine. these hardly have any way at all.

 

[SunlitComet]

Things that go bump in the night. Again.