Cheap parts before off to scrap

[1badc4]

still have quite a bit of parts. make reasonable offer. headed to scrap in a couple weeks, 3 good side doors 1 good rear one with small dent. have 3 interior door panels. lots left. pick up in South jersey.
Vortec engine cover $10

Master window switch $20

steering column $50

door panels $25 ea.

Doors $40 ea.

let me know what you need. View attachment 234260

 

[iamdub]

Can't believe you're gonna scrap them painted handles. :-/

 

[1badc4]

View attachment 234265

Can't believe you're gonna scrap them painted handles. :-/

I'm not

 

[Doubeleive]

I would pull the windows and regulators, hood, rear hatch & glass, rear axle, calipers, abs module, all kinds of good stuff there

 

[iamdub]

View attachment 234265

I'm notView attachment 234275 View attachment 234276

Oh! I was going by the parted-out pic. Looks so much better!

 

[HiHoeSilver]

If you're gonna scrap the door panels, at least pull those courtesy lights out of them without breaking the tabs! I've got a busted one!

 

[915_Tahoe]

those rear window switch bezels are good to have, then tend to break in half.

 

[Erickk120]

What was the mileage and do you still have the drive shaft?

 

[ivin74]

How much for the drivers tail light wiring harness shipped to 77581?

 

[1badc4]

What was the mileage and do you still have the drive shaft?

183, only front

 

[1badc4]

How much for the drivers tail light wiring harness shipped to 77581?

where does it unplug from? If its a simple unplug I let you have it for shipping cost.

 

[bignickmel100]

View attachment 234266 View attachment 234261 View attachment 234262 View attachment 234263 View attachment 234264 still have quite a bit of parts. make reasonable offer. headed to scrap in a couple weeks, 3 good side doors 1 good rear one with small dent. have 3 interior door panels. lots left. pick up in South jersey.
Vortec engine cover $10

Master window switch $20

steering column $50

door panels $25 ea.

Doors $40 ea.

let me know what you need. View attachment 234260 View attachment 234261 View attachment 234262 View attachment 234263 View attachment 234264

Pass. side window reg. and motor??

 

[1badc4]

Pass. side window reg. and motor??

was no good. the only window that did not work

 

[bignickmel100]

was no good. the only window that did not work

That figures!

 

[ivin74]

where does it unplug from? If its a simple unplug I let you have it for shipping cost.

Tomorrow I will send you a picture where to cut the harness. It's right under the drivers side rear bumper. You can disconnect one section, I also need the other side of the connection as well.

 

[Staggered 02]

Bump for good seller. Great communication. Your steering column post reminded me.

I'd like the items 11 & 12 on the exploded view attached below. LMK how much shipped to Louisiana 70458. I need both pieces so that I can have one spare plus rework the one that inserts into the steering column. Thanks.

 

[1badc4]

Bump for good seller. Great communication. Your steering column post reminded me.

I'd like the items 11 & 12 on the exploded view attached below. LMK how much shipped to Louisiana 70458. I need both pieces so that I can have one spare plus rework the one that inserts into the steering column. Thanks.

View attachment 234540 View attachment 234541 View attachment 234542

I don't see a #12 in exploded view.

 

[Staggered 02]

Yes, sorry. I meant no 14. Thus 11 & 14. Thanks.

 

[1badc4]

Yes, sorry. I meant no 14. Thus 11 & 14. Thanks.

Okay i'll check them out and make sure they are good. truck had slight slop in steering but I contribute that to 183K miles and in steering box and idlers and tie rod ends were definitely beat. if good I'll do $25+ shipping

 

[Staggered 02]

Yes sir, I agree slop likely associated with steering box, idlers, tie rod ends etc..

Price is fine. LMK what you find and I'll get funds sent. Thanks.