Shackman7878
Latest activity Postings About
-
-
Shackman7878 replied to the thread 9L7 upfitter switches.Here is the part number if anyone wants to order it 9L7 Up fitter Kit Black Part Number - 84942073 Harness Instrument Panel Auxiliary... -
Shackman7878 replied to the thread How to Test Wires So I can cut dead wires?.All that Trim pops off super easy unless someone used self tappers, My guess all those wires runs to the back area or up the A pillars...
-
Shackman7878 reacted to Fless's post in the thread How to Test Wires So I can cut dead wires? with
Like.
Be sure to test in all key positions: off, run, and start. -
Shackman7878 replied to the thread How to Test Wires So I can cut dead wires?.I seen your post in the PPV section I would look at a Test light easier to use for now, If you have a little money and want to get a...
-
-
Shackman7878 replied to the thread Radiator fan runs when engine is cold.I have a 09 Yukon XL (gmt900) was thinking about ditching the clutch fan but cant find a decent kit or write up that dose not involve...
-
Shackman7878 reacted to swathdiver's post in the thread Radiator fan runs when engine is cold with Like.
Some more who might share their experiences: @Jimmit @Shackman7878 @Nap73 @99bluefirebird @Oldmopars @t_bergman @tungsten @02Yukon2500...
-
Shackman7878 replied to the thread Removing SSV Center Console/Wiring.There is videos on YouTube, Most you are going to run into is 12 Volts, 1 to 5 volts, and grounds. 1:30
-
Shackman7878 replied to the thread Removing SSV Center Console/Wiring.You found one of my old post, it is a direct fit our center dash sticks out more then the truck model see attached photo it is more...
-
-
Shackman7878 replied to the thread Removing SSV Center Console/Wiring.If you have a Volt meter or DVOM or test light I would check what wires are live and what are dead. I would follow each wire to the dash...
-
-
Loading…
-
Loading…
