Burbalac

[Burbalac guy]

Hello Chevy world from Texas. I own a 1995 Chevy Suburban C1500 with a 99-00 Cadillac Escalade front clip and Cadillac De Ville tailights.

What can i do with my dash as far as swaps? Dash swaps? Or updated gauge swaps?

I need a new front bumper cover for the Escalade front clip. Do i have to buy the kit parts? Or can i buy just the oem Cadillac Escalade Bumper cover???

 

[ccapehartusarmyINF.(ret)]

now all you need is a picture of you next to it in white tuxedo with ruffles wearing a ten gallon top hat and a pimp cane and some big rim sunglasses

 

[Burbalac guy]

now all you need is a picture of you next to it in white tuxedo with ruffles wearing a ten gallon top hat and a pimp cane and some big rim sunglasses

Hahaha very funny

 

[Burbalac guy]

I am really interested in Dash swap possibilities. Does anyone know anything? i would really like to use something from Cadillac Escalade if possible

 

[ccapehartusarmyINF.(ret)]

does it have the more modular kinda rounded dash wich i think came out in the later 90s or is it the old square one with the amfm next to the steering column and the tape deck in the center

 

[Burbalac guy]

It is the more round kind here are some pictures.

 

[ccapehartusarmyINF.(ret)]

okay at least you got the more modular dash

 

[Burbalac guy]

okay at least you got the more modular dash

Ok but that doesnt help me.
Do you have any information for me?
I am looking for solutions Do you have any?
I looked online and found nothing

 

[ccapehartusarmyINF.(ret)]

lol my bad dude
here in phoenix we have u pull junk yards or autorecyclers id be calling those places around were i live see if you can find the newer dash like you want
thats were id start

 

[ccapehartusarmyINF.(ret)]

one thing we have goin here in the valley though is tahoes and suburbans are a dime a dozen

 

[Burbalac guy]

one thing we have goin here in the valley though is tahoes and suburbans are a dime a dozen

Ok thanks for the effort but that really does not help me. I need specific information about dash swaps.
We have that kind of Junk yards here also.

I wish someone who had done a dash and gauge swap would comment

 

[about20ninj45]

Ok thanks for the effort but that really does not help me. I need specific information about dash swaps.
We have that kind of Junk yards here also.

I wish someone who had done a dash and gauge swap would comment

Dash swaps are a dime a dozen a d are not for the faint of heart. If your ok with welding, cutting metal and molding plastic then you are good to go. Start by selecting a vehicle that has a dash with similiar mount8ng brackets as your that way you dont have to do much modding. M3asure the width of the dash and also the height from base of the cabin floor to the bottom of the dash. This will give you your rough dimensions. You may have to re-route your vents.

 

[Burbalac guy]

Dash swaps are a dime a dozen a d are not for the faint of heart. If your ok with welding, cutting metal and molding plastic then you are good to go. Start by selecting a vehicle that has a dash with similiar mount8ng brackets as your that way you dont have to do much modding. M3asure the width of the dash and also the height from base of the cabin floor to the bottom of the dash. This will give you your rough dimensions. You may have to re-route your vents.

Ok Very informative and very specific. Thank you very much.What about gauge swaps? How would i interface with original gauge wires?


I really would like to put a set of Cadillac Escalade gauges and dash with Touchscreen navigation unit or something similar

 

[about20ninj45]

Two ways of going about this. You can use your own/custom aftermarket gauges. or you can get ht pcm out of the donor vehicle and splice your existing signals from the original ecu/pcu/tcu/bcm to that of the donor.

youll need the PCM, the complete wiring harness from the donor, applicable control modules from the donor, and the instrument cluster


you are only using the donors ecu/tcu/pcu/bcm for the gauges and not anything else. it will throw codes unless you have an appropriate flash/programming or you'll need a stand-alone program to translate different manufacturer's code so they can communicate. IIRC.

 

[ccapehartusarmyINF.(ret)]

so how much do the dashes differ on how they mount from generation to generation

 

[about20ninj45]

so how much do the dashes differ on how they mount from generation to generation

Closer the years, not by much if sticking with the same manufacturer. But cgevyvtgrew an odd curve when the releases their new platform 2014-15

 

[ccapehartusarmyINF.(ret)]

cgevyvtgrew?

 

[about20ninj45]

cgevyvtgrew?

Huh?

 

[ccapehartusarmyINF.(ret)]

you said in the post before "But cgevyvtgrew an odd curve when the releases their new platform 2014-1"
did you just mistype?

 

[Burbalac guy]

Two ways of going about this. You can use your own/custom aftermarket gauges. or you can get ht pcm out of the donor vehicle and splice your existing signals from the original ecu/pcu/tcu/bcm to that of the donor.

youll need the PCM, the complete wiring harness from the donor, applicable control modules from the donor, and the instrument cluster


you are only using the donors ecu/tcu/pcu/bcm for the gauges and not anything else. it will throw codes unless you have an appropriate flash/programming or you'll need a stand-alone program to translate different manufacturer's code so they can communicate. IIRC.

Thank you very much. I am looking into the Cadillac Escalade 6.0 swap with my 5.7 tbi.
Could i just use that harness from the Escalade?