TooMuchTxn
Full Access Member
So bear with me this is going to be a project.
I started off with the normal bolt ons and blackbear tune for my 2016 Tahoe LTZ 5.3. This was good but not enough.
Then i got a great deal on a TVS2300 Edelbrock supercharger. WOW fantastic. But now I have the bug...
So this led to me acquiring a low mileage L86 from a wreck with the intent to do a swap and call it a day. As I dove into the 6.2 and was deciding what to upgrade is when things started going off the rails.
-Got some LT4 Injectors (still looking for a good deal on a LT4 pump)
-Already have a ported Weapon X LT1 Throttle Body
-Corsa Cat Back Exhaust
-AFE Momentum GT Intake
-Every part of the L86 is replaced or upgraded
Delivered today were the guts of my 416 build...
-Ported & Polished LT1 Heads with TSP dual spring kit and CHE Trunion kit.
-TSP Stage 1 Cam +32% Fuel Lobe
-C5R Timing Chain
-TSP H-Beam Rods
-Mahle 4.07 Pistons
-TSP Stroked 4" Crank
-DOD Delete Kit
-TSP DOD Delete Cover
-LS7 Lifters
-ARP Everything.
Im working with a machine shop to set up an appointment now that everything is here.
Still Need:
-Headers
-Exhaust
I don't know what I'm going to do at this point honestly since this has evolved further than I planned.
I don't know if this is for sure going to go in the Tahoe. It might just be too much. If I can find a C7 with no engine I may just go that route and then beef up the 5.3.
Either way this should be fun!
I would love ideas and input since i've kind of painted myself into a corner.
I started off with the normal bolt ons and blackbear tune for my 2016 Tahoe LTZ 5.3. This was good but not enough.
Then i got a great deal on a TVS2300 Edelbrock supercharger. WOW fantastic. But now I have the bug...
So this led to me acquiring a low mileage L86 from a wreck with the intent to do a swap and call it a day. As I dove into the 6.2 and was deciding what to upgrade is when things started going off the rails.
-Got some LT4 Injectors (still looking for a good deal on a LT4 pump)
-Already have a ported Weapon X LT1 Throttle Body
-Corsa Cat Back Exhaust
-AFE Momentum GT Intake
-Every part of the L86 is replaced or upgraded
Delivered today were the guts of my 416 build...
-Ported & Polished LT1 Heads with TSP dual spring kit and CHE Trunion kit.
-TSP Stage 1 Cam +32% Fuel Lobe
-C5R Timing Chain
-TSP H-Beam Rods
-Mahle 4.07 Pistons
-TSP Stroked 4" Crank
-DOD Delete Kit
-TSP DOD Delete Cover
-LS7 Lifters
-ARP Everything.
Im working with a machine shop to set up an appointment now that everything is here.
Still Need:
-Headers
-Exhaust
I don't know what I'm going to do at this point honestly since this has evolved further than I planned.
I don't know if this is for sure going to go in the Tahoe. It might just be too much. If I can find a C7 with no engine I may just go that route and then beef up the 5.3.
Either way this should be fun!
I would love ideas and input since i've kind of painted myself into a corner.