Air box snorkel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Thrust

Full Access Member
Joined
Oct 23, 2020
Posts
441
Reaction score
516
Location
ICT
Does anyone have the end of their airbox with the snorkel?
Mine on my 2015 detaches. Let me know and throw me a price.
ThanksIMG_20221219_195156.jpg
 

BlaineBug

Full Access Member
Joined
Dec 29, 2019
Posts
1,062
Reaction score
559
I see. I know this is unrelated but the stock airbox flows PLENTY. A lot of these "cold air intake kits" are a bunch of hype, some are even WORSE than factory in regards to drawing in hotter air than OEM. Also the "huge" OEM intake silencer box between the radiator and throttle body doesn't limit flow at all, there's no real reason to replace it with a "tube" unless you don't like that large box obstructing the motor.
 
OP
OP
Thrust

Thrust

Full Access Member
Joined
Oct 23, 2020
Posts
441
Reaction score
516
Location
ICT
So what's the mass flow of the snorkel when you add a 2.3L Magnuson on the 6.2L?
I appreciate you trying to educate me but my Yukon is not stock.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,712
Reaction score
44,431
Location
Li'l Weezyana
Does anyone have the end of their airbox with the snorkel?
Mine on my 2015 detaches. Let me know and throw me a price.
ThanksView attachment 387770

So what's the mass flow of the snorkel when you add a 2.3L Magnuson on the 6.2L?
I appreciate you trying to educate me but my Yukon is not stock.


It looks similar enough to my '08. Could you do something like this?


and



Gigantic hole and super tight seal for cheap! You'd lose the snorkel. But, I don't know how critical that even is when SC'ed.
 
OP
OP
Thrust

Thrust

Full Access Member
Joined
Oct 23, 2020
Posts
441
Reaction score
516
Location
ICT
I did something similar, and also enlarged the fender cutout to match. Looks alot like what you have.
I definitely like the seal you went with. Thanks for the info.
 
Last edited:

BlaineBug

Full Access Member
Joined
Dec 29, 2019
Posts
1,062
Reaction score
559
I did something similar, and also enlarged the fender cutout to match. Looks alot like what you have.
I definitely like the seal you went with. Thanks for the info.
That foam is factory at least for the 2015-2020 crowd.
 

Forum statistics

Threads
128,781
Posts
1,805,301
Members
91,760
Latest member
MyCleftNut

Latest posts

Top