ABC Light and Speed Sensor Code

[Doubeleive]

I have replaced them both.

then there must be a wiring problem to the right side, there should be a procedure to narrow it down, have you looked at the wire harness to see if there is any obvious breaks or worn spots?, I would test for voltage at the connector pins and then behind the connector.

 

[Marshall2002]

did you try swapping the front left/right sensors?

I have replaced them both.

 

[swathdiver]

Did you use Chicom hubs? I replaced one that works fine but the ABS sensor never worked on it. Timken from then on out, always works, bearing and sensor!

 

[Marshall2002]

I used Moog bearings. This morning, I replaced the wiring harness connector. No obvious breaks though. Light still on.