phattyford
Full Access Member
why can't i get a deal like this? like hey, i wanna know how you like this new drop...here ya go buddy, throw this on and report back to me in a few weeks. 
6 inch lowering springs
- Thread starter NORCAL SS
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
boxed and going out in the morning
iwaslowr
ɹǝqɯǝɯ ɹoıuǝs
Before and after pics if possible??
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
tested on a trailblazer these springs gave 7/8 of a inch more drop. Should be about 7/8 of a inch more over the tb springs on your truck also. Looking forward to where it sits
houstone003
Full Access Member
- Joined
- Nov 3, 2011
- Posts
- 201
- Reaction score
- 0
so am i..
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
you should get em tomorrow... hopefully
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
did you get em in?
Tony Shipped the coils quick!!
Received them this past weekend and installed them on Sunday Morning
took the truck on a 100 mile roundtrip Sunday afternoon and the truck rode great
Rides better than the DJM trailblazer coils I had on before the swap
Here is my Current Set up:
Front - Belltech 2" spindles and Belltech adjustable shocks set to 1" = 3" total drop
Rear - DJM Rear Hardware Kit, Tony's 6" Coils, and Belltech SP Shocks. = 6" total drop
Factory 20's with 275/55R20 Bridgestone tires - Factory Set up
Rear ground to lip measurements with the older DJM Trailblazer Coils 33-1/2"
New Measurement with Tony's new drop coils is 32-1/2"
I gained an extra inch of drop using the new coils
Here are the photos Before and After --
Before
DSC_0361 by jgarza, on Flickr
Fender Measurement - Before -
DSC_0358 by jgarza, on Flickr
Coils :
DSC_0365 by jgarza, on Flickr
After :
DSC_0368 by jgarza, on Flickr
Fender Measurement - After:
DSC_0366 by jgarza, on Flickr
Probably does not look like much difference but I can tell the truck is more level than before.
Rides great I would recommend this to anyone wanting to drop their truck more.
Received them this past weekend and installed them on Sunday Morning
took the truck on a 100 mile roundtrip Sunday afternoon and the truck rode great
Rides better than the DJM trailblazer coils I had on before the swap
Here is my Current Set up:
Front - Belltech 2" spindles and Belltech adjustable shocks set to 1" = 3" total drop
Rear - DJM Rear Hardware Kit, Tony's 6" Coils, and Belltech SP Shocks. = 6" total drop
Factory 20's with 275/55R20 Bridgestone tires - Factory Set up
Rear ground to lip measurements with the older DJM Trailblazer Coils 33-1/2"
New Measurement with Tony's new drop coils is 32-1/2"
I gained an extra inch of drop using the new coils
Here are the photos Before and After --
Before
DSC_0361 by jgarza, on Flickr
Fender Measurement - Before -
DSC_0358 by jgarza, on Flickr
Coils :
DSC_0365 by jgarza, on Flickr
After :
DSC_0368 by jgarza, on Flickr
Fender Measurement - After:
DSC_0366 by jgarza, on Flickr
Probably does not look like much difference but I can tell the truck is more level than before.
Rides great I would recommend this to anyone wanting to drop their truck more.
