20x12s

[MandezeeFMB]

I just bought a 2001 Tahoe Z71 Stock. I have some new 20x12 XD diesel rims with 33s. I want to know if i can get away with using a leveling kit for now. If so which one should i get?

 

[brucebruce45]

You can but ur not gonna want to. Gonna have to hack a whole lot

 

[MandezeeFMB]

Thank you for your reply. I figured i would have to do some trimming but just not sure how much. I tried searching for some pictures online just to see what it would look like but the closest i found was someone running 20x10 with 33s. What leveling kit would you suggest i try?

 

[brucebruce45]

Go to ford dealership and ask for ford torsion keys, hey are all the same, get longer shocks, 2" spacer for rear from eBay. To fit those x12s ur gonna need atleast a 3"'bl or a real lift or cut something serious

 

[MandezeeFMB]

Okay, Thank you

 

[Jbird]

i fit 33 discovery stt's with 20x12 rockstars with just cranking the stock keys. youll be fine with lift keys

 

[MandezeeFMB]

Cool Man thanks.

 

[bowtiefreak]

got a saw? you'll need it. Brandon knows his stuff when it comes to big / wide wheels.

 

[Max]

Maybe on 20x10 with keys, spacers, and some cutting.

 

[Jbird]

yea i had 20x12 with 33s no lift at all. no trimming. then i had 20x10s with 35" toyo m/ts with just lift keys just had to do alittle trimming. people over exaggerate the rubbing issue

 

[Max]

Completely dependent upon the offset but I'm a bit dubious about you running 20x12s with no lift and 33s. Cranked keys, high offset, and 305/50s maybe but these trucks don't clear wide ass wheels too easily without some trimming (which isn't bad if you do it right).

 

[Jbird]

i had cranked stock keys for the 33s but that barely leveled it out if that.

my buddies yukon behind it sat just as high as mine with 33s stock. i really think some just sit higher then others

 

[brucebruce45]

Those arnt x12s. The tires not even stretched and ur wheels are tucked. Can't fit x12s an 33s without major hacking on just keys

---------- Post added at 12:38 PM ---------- Previous post was at 12:01 PM ----------

These are x12s on 33s with a 6". Look how the tires are stretched and how far they stick out. Look how much the bumper had to be cut even with a cranked 6". Plz do research before posting bc its obvious u have no clue what wheel setup u have

 

[LOUDHOE]

Those arnt x12s. The tires not even stretched and ur wheels are tucked. Can't fit x12s an 33s without major hacking on just keys

---------- Post added at 12:38 PM ---------- Previous post was at 12:01 PM ----------

These are x12s on 33s with a 6". Look how the tires are stretched and how far they stick out. Look how much the bumper had to be cut even with a cranked 6". Plz do research before posting bc its obvious u have no clue what wheel setup u have

I dont think he was saying he had X12s he was just showing stock keys and 33s

 

[brucebruce45]

I dont think he was saying he had X12s he was just showing stock keys and 33s

Read post 6 and 10

 

[MandezeeFMB]

Thanks for everyones help. I think im just going to buy the rough country kit and try it. If it doesnt work out ill just sell them and buy some 26s

---------- Post added at 02:04 PM ---------- Previous post was at 02:01 PM ----------

XD Diesel's Machined 20x12's wrapped in 33x12.50's

 

[jd123]

It's gonna rub. I have 20x10's on 35's with keys, 1.5" spacers, and a 3" body lift and had to do quite a bit of trimming.

 

[WildBill]

12 is too wide. 20x8 to 20x10 and it will work for you. take pictures of the cutting!

 

[westcoast]

Thanks for everyones help. I think im just going to buy the rough country kit and try it. If it doesnt work out ill just sell them and buy some 26s

---------- Post added at 02:04 PM ---------- Previous post was at 02:01 PM ----------

XD Diesel's Machined 20x12's wrapped in 33x12.50's

nice wheels hmm Ill have to try to see if something like that fits on my tahoe.
edit: If you do decide to sell them let me know thanks.

 

[MandezeeFMB]

---------- Post added at 01:20 PM ---------- Previous post was at 01:09 PM ----------

[/COLOR]

[/IMG] I Barely had to trim the front valance. Ill post more pics soon!