Radiotech1
TYF Newbie
- Joined
- Jan 21, 2024
- Posts
- 4
- Reaction score
- 1
I am trying to remove the Knee Bolster to run a power wire for my radar detector. I am connecting a Micro 3 fuse tap to RAP fuse 26 in the passenger side fuse block.
I have removed two 7mm screws from the left side of the knee bolster, but the top won't pull out. Are there some more hidden screws on top or am I just not pulling hard enough?
It is item 7 in the attached picture.
I have removed two 7mm screws from the left side of the knee bolster, but the top won't pull out. Are there some more hidden screws on top or am I just not pulling hard enough?
It is item 7 in the attached picture.