2019 Suburban mid travel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Cadi_Mike

TYF Newbie
Joined
Aug 15, 2019
Posts
18
Reaction score
15
Location
Austin TX
Not sure if this guy is on the forums, but on instagram @projectsuburban

He has king 2.5, baja kits(now camburg) UCAs and clears 35s with trimming. This is the exact setup I want to pursue in the future for my build. Here are some pics from his instagram and the last one of my truck on 33s:

upload_2020-12-28_17-7-3.png
upload_2020-12-28_17-7-15.png
yfIT47QDgfUrAjk4SOzEVvN153zEyEg4jwqKbREP-Wb9uoo7O8qXCdpH7dosyl32fuQjV9ehj4m9qnsrINOdghqA8zn9FOJr4wVro18WFWad2De85JP3_ZYHR5KF2jEmG21RB1sa9xbY9QoDU4BFQpp0bq-v2kngrKmTJvDEHMOsZ3ZRP_zGTA6aAUGz-iZVe6rqQdTYDe9q8Bi_940oNkT_ahsOHCTLQM6SaND36HS6rMB3JGC67XavBkRHO6TK0-JPgktrj6N0j2G9-Bfht-_lN8SQmS7kZlT6nNb2xL10yDLkR3hz3EAOq-NnEf-VvGlCrOyM47PgoiAljcMlzw8CXuRtTba1Afd9Ybm-QdHri19h9W_RvKqeWzo63ovbJTbkbHOsHgPz5CZYsg87-NcoFmDdMZKi_fhOLpgq62bC2VDMIonPo04Z-k_RHDKGjqo-IruoPJKU2KfcW5izxyQYfLNNQDIJxfs68Y4pI3bue1tZDE4N51ps3nKo02retJV4qBnlaV2gE0rcJlnvFbGd-_bR4lfBxSu4-AFHF8fEO6M8d-JgEac9OVND3bkAnPQ8KaFAMpijQfYF5AvUKdF3u0eY2gBJnjeQenVSqtLDMYEWDnQ-G5ef1_HB8uD9CEPEYctuG478hHZYXRjpb-NWpi-b4mxsDzC1NaWQBn6YA8KoBezYwQo2JB3Mmw=w934-h700-no
 

Tiki

Full Access Member
Joined
Jun 4, 2013
Posts
639
Reaction score
318
Not sure if this guy is on the forums, but on instagram @projectsuburban

He has king 2.5, baja kits(now camburg) UCAs and clears 35s with trimming. This is the exact setup I want to pursue in the future for my build. Here are some pics from his instagram and the last one of my truck on


yfIT47QDgfUrAjk4SOzEVvN153zEyEg4jwqKbREP-Wb9uoo7O8qXCdpH7dosyl32fuQjV9ehj4m9qnsrINOdghqA8zn9FOJr4wVro18WFWad2De85JP3_ZYHR5KF2jEmG21RB1sa9xbY9QoDU4BFQpp0bq-v2kngrKmTJvDEHMOsZ3ZRP_zGTA6aAUGz-iZVe6rqQdTYDe9q8Bi_940oNkT_ahsOHCTLQM6SaND36HS6rMB3JGC67XavBkRHO6TK0-JPgktrj6N0j2G9-Bfht-_lN8SQmS7kZlT6nNb2xL10yDLkR3hz3EAOq-NnEf-VvGlCrOyM47PgoiAljcMlzw8CXuRtTba1Afd9Ybm-QdHri19h9W_RvKqeWzo63ovbJTbkbHOsHgPz5CZYsg87-NcoFmDdMZKi_fhOLpgq62bC2VDMIonPo04Z-k_RHDKGjqo-IruoPJKU2KfcW5izxyQYfLNNQDIJxfs68Y4pI3bue1tZDE4N51ps3nKo02retJV4qBnlaV2gE0rcJlnvFbGd-_bR4lfBxSu4-AFHF8fEO6M8d-JgEac9OVND3bkAnPQ8KaFAMpijQfYF5AvUKdF3u0eY2gBJnjeQenVSqtLDMYEWDnQ-G5ef1_HB8uD9CEPEYctuG478hHZYXRjpb-NWpi-b4mxsDzC1NaWQBn6YA8KoBezYwQo2JB3Mmw=w934-h700-no

I’d go this direction IMO:

https://sdhqoffroad.com/pages/******-lac#
 
OP
OP
RB_Trucker

RB_Trucker

Full Access Member
Joined
Aug 26, 2015
Posts
146
Reaction score
192
Location
Redondo Beach
Not sure if this guy is on the forums, but on instagram @projectsuburban

He has king 2.5, baja kits(now camburg) UCAs and clears 35s with trimming. This is the exact setup I want to pursue in the future for my build. Here are some pics from his instagram and the last one of my truck on 33s:

View attachment 266198
View attachment 266199
yfIT47QDgfUrAjk4SOzEVvN153zEyEg4jwqKbREP-Wb9uoo7O8qXCdpH7dosyl32fuQjV9ehj4m9qnsrINOdghqA8zn9FOJr4wVro18WFWad2De85JP3_ZYHR5KF2jEmG21RB1sa9xbY9QoDU4BFQpp0bq-v2kngrKmTJvDEHMOsZ3ZRP_zGTA6aAUGz-iZVe6rqQdTYDe9q8Bi_940oNkT_ahsOHCTLQM6SaND36HS6rMB3JGC67XavBkRHO6TK0-JPgktrj6N0j2G9-Bfht-_lN8SQmS7kZlT6nNb2xL10yDLkR3hz3EAOq-NnEf-VvGlCrOyM47PgoiAljcMlzw8CXuRtTba1Afd9Ybm-QdHri19h9W_RvKqeWzo63ovbJTbkbHOsHgPz5CZYsg87-NcoFmDdMZKi_fhOLpgq62bC2VDMIonPo04Z-k_RHDKGjqo-IruoPJKU2KfcW5izxyQYfLNNQDIJxfs68Y4pI3bue1tZDE4N51ps3nKo02retJV4qBnlaV2gE0rcJlnvFbGd-_bR4lfBxSu4-AFHF8fEO6M8d-JgEac9OVND3bkAnPQ8KaFAMpijQfYF5AvUKdF3u0eY2gBJnjeQenVSqtLDMYEWDnQ-G5ef1_HB8uD9CEPEYctuG478hHZYXRjpb-NWpi-b4mxsDzC1NaWQBn6YA8KoBezYwQo2JB3Mmw=w934-h700-no


That’s pretty much what I want to do, Tons of free travel, upper and lower uniball arms and I don’t mind pushing my front track out 2” on each side. I was looking at Baja kits and Icons mid travel kits.

glad I could see the rear set up too, I was thinking the Z-71 and 2” spacer setup also maybe some limiting straps for droop and upgraded trailing arms for articulation. I especially like that I can fit those piggyback shocks in the stock location.
 
OP
OP
RB_Trucker

RB_Trucker

Full Access Member
Joined
Aug 26, 2015
Posts
146
Reaction score
192
Location
Redondo Beach
Well here’s a late update I finally pulled the trigger and got my uniball uppers my alignment cams and my king 2.5 remote reservoir coil overs. When I get a chance I’m going to order King remote reservoir piggyback shocks For the rear. I’m coming up due for new tires so I think I’m gonna go up a size to 35“ x 12.50 needle tires or Goodyear Wrangler duratracs again. This set up should keep me at my 3 inch height that I prefer



D3E39DE9-588A-4DBE-8522-90487233FE9B.png
 

Fifty

Full Access Member
Joined
Jun 26, 2015
Posts
790
Reaction score
193
I went with the ADS stuff. I had to dial back the preload quite a bit to match the z71 springs. (And z71 bumps).

These are 600# springs on the coilovers.

Curious how much needs trimming to fit 35’s
 

Attachments

  • 1F1CBECE-913A-46FA-8FD5-E33C22C862C1.jpeg
    1F1CBECE-913A-46FA-8FD5-E33C22C862C1.jpeg
    434.4 KB · Views: 24
  • 30C12942-6DFF-4C8D-81AB-3C374B530AE3.jpeg
    30C12942-6DFF-4C8D-81AB-3C374B530AE3.jpeg
    737.3 KB · Views: 26
  • 86226F35-C35A-4C84-AC17-FA20275A4BC8.jpeg
    86226F35-C35A-4C84-AC17-FA20275A4BC8.jpeg
    422.9 KB · Views: 23
  • CF16FCDA-528A-44E6-B996-3200658AA5B2.jpeg
    CF16FCDA-528A-44E6-B996-3200658AA5B2.jpeg
    322.2 KB · Views: 23
  • 9BD437D8-284C-448F-8A1B-AF4AF4067EA3.jpeg
    9BD437D8-284C-448F-8A1B-AF4AF4067EA3.jpeg
    382.3 KB · Views: 23
OP
OP
RB_Trucker

RB_Trucker

Full Access Member
Joined
Aug 26, 2015
Posts
146
Reaction score
192
Location
Redondo Beach
I went with the ADS stuff. I had to dial back the preload quite a bit to match the z71 springs. (And z71 bumps).

These are 600# springs on the coilovers.

Curious how much needs trimming to fit 35’s
I know some guys back off on the preload and add anywhere from 1/2”-1” spacer to help out.

That stance looks good right there, I’ll figure out trimming once I get the new rims and tires delivered. Will be interesting.
 
OP
OP
RB_Trucker

RB_Trucker

Full Access Member
Joined
Aug 26, 2015
Posts
146
Reaction score
192
Location
Redondo Beach
all right, so here’s a little bit of an update on my mid travel build,
I purchased 275/70r18 Goodyear territory tires, which are OEM on the new Silverado ZR2 (I was going to do the 305 size, but they don’t offer that in a narrow 35”)
Rims are 18x9 KMC impact in 0mm offset. So no more wheel spacers.

Now the big thing is that I waited nine weeks for my 2.5 inch remote coil overs and had to change them to fox because dirt king was having issues with availability but they told me the foxes are actually better quality now and should last longer and ride better.
I drive semi trucks so it’s taking a bit for me to get home and install everything.
I will post pictures when I do the install around October 22.
62F1FC13-3208-46C3-9CB9-BC1A9E5B433A.png
 

Attachments

  • 3DF0F73B-A6C7-4D85-BE17-D4D04124F2EB.png
    3DF0F73B-A6C7-4D85-BE17-D4D04124F2EB.png
    415.3 KB · Views: 3

Forum statistics

Threads
128,788
Posts
1,805,457
Members
91,768
Latest member
PascalBlues
Top