2013 Tahoe w/ 3.5" Lift, 22" Snowflake Replicas & 33x12.50 Tires - Before and After

[ericscott44]

2013 Tahoe w/ 3.5" Lift, 22" Snowflake Replicas & 33x12.50 Tires - Before and After

 

[Miami-Dade]

Welcome from Miami Beach Eric!! Looks good with the 3.5 Lift..Looks to be in excellent shape..Nice with the Snowflake Replicas&tires..Nice job!!!!

 

[CMil527]

Nice looking rig... welcome!

 

[Fosscore]

Welcome.

 

[PG01]

Love it, looks good bud

 

[Mike Shabo]

Very sharp looking truck! What type of lift is on it?

 

[Matt_]

I was expecting to see a bit less clearance, what's the metric size of the tire?

 

[ericscott44]

Rough country 3.5 inch lift. It is basically a leveling kit with new control arms and lower brackets for other components. Runs around $500. Not sure of metric size but the tires are 33x12.50x22. I believe 35s would fit with slight rubbing in inner fender.

 

[ericscott44]

More pocs

 

[ericscott44]

 

[Mike Shabo]

Absolutely BEAUTIFUL. My last question is what did you do about your auto ride ? Did you just ditch it altogether or use threaded rod to reconnect it? I’m about to pull the trigger in the same lift but this was my last “hurdle” to address before I do.

 

[ericscott44]

I didn't have to adjust the auto drive. I assume you are talking about AWD. Everything works as expected since the lift technically keeps all angles close to factory .

 

[ericscott44]

I didn't put the lift on so the kit could have the rod you are speaking of .

 

[ericscott44]

My truck doesnt air bags, I know a lot of the lifts I looked at did not work with air systems .

 

[Mike Shabo]

That’s what I was getting at. The air ride. I’ve got it in the Denali and I keep seeing that all these kits don’t work with air ride or AWD but work with 4wd

 

[ericscott44]

Yeah don't have air ride but my AWD seems to work fine .I normally leave it in 2WD but have tested the AWD and 4WD and had no issues .

 

[ericscott44]

If I hit severe bumps in a curve my traction control will kick on.

 

[ericscott44]

http://www.roughcountry.com/gm-suspension-lift-kit-219c.html

Lift I installed .Appears it doesn't work with awd models and air ride.

 

[Bmorey67]

Thanks for the pictures bro. I have the same truck. I’m putting a 3.5” lift kit on mine as we speak. I’m debating whether to put the 33s like you have or go with 35s. It looks like the 35 would clear them with some trimming.