iamdub
Full Access Member
Stuff like this doesn't just "pop up" on craigslist around here! That setup is good for about a 20-lb. saving at each corner 
2013 Avalanche...LMG 5.3 to L96 6.0 (Pics)
- Thread starter 01FormulaTA
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
Stuff like this doesn't just "pop up" on craigslist around here! That setup is good for about a 20-lb. saving at each corner
Yes it was pretty random...as far as I know these are 1 offs and the only set CCW has ever made for a GMT900 Truck/SUV
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
well I did some work on the truck today....I have over 1000 miles on the swap now so I pulled the intake and the valve covers and re-torqued all the rocker arm bolts (22 ft-lb) and the headers bolts (18 ft-lb)...none of them were loose but it was nice insurance on my new motor and to make sure I stay exhaust leak free...Happy to report everything appears to be in tip top shape...I m gonna change the oil in the next few days as well....
Last edited:
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
Decided I was already dirty so I went ahead and installed the rear PPV tahoe springs and some new OEM shocks to go along with it....the new are springs are SIGNIFICANTLY smaller than the stockers...it was a 2" rear drop on my Avalanche for sure...unfortunately no before pics only some after pics....
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
Some Part Numbers...
Rear Shocks (20955430)
Rear PPV Springs (15200994)
Replaced all 4 of my Rubber Exhaust Hangers with new OE ones as well (15092802)
Rear Shocks (20955430)
Rear PPV Springs (15200994)
Replaced all 4 of my Rubber Exhaust Hangers with new OE ones as well (15092802)
randeez
Full Access Member
Stuff like this doesn't just "pop up" on craigslist around here! That setup is good for about a 20-lb. saving at each corner
chance favors the prepared
damn nice find TA
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
The old L96 6.0...will prob keep it around as a spare for the time being....
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
Some under hood pics...still nice and clean...
The Kooks are breaking in nicely...
The Kooks are breaking in nicely...
OP
OP
01FormulaTA
Full Access Member
- Joined
- Mar 23, 2017
- Posts
- 534
- Reaction score
- 561
And the Money Shot....Keep in the mind the front will be coming down another 1/2" soon, in the next couple days Im gonna install some new OE struts up front and remove a 1/2" spacer I have in there now so it will have just a tiny bit more rake to it...
Similar threads
