2011 Yukon Denali Headlight ground issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RDEVans

TYF Newbie
Joined
May 29, 2022
Posts
27
Reaction score
15
Hey all,

I have a 2011 GMC Yukon Denali that I believe is having a ground issue. Passenger side headlight works fine. Driver side was not working properly so I replaced bulbs, fuses, and relay. The headlight is still very dim on lowbeam and there is no high beam when I put on the brights. I’m guessing it’s a ground issue but looking for advice. And if it is a ground any idea where it’s connection would be at? Thanks!
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,881
Reaction score
2,500
Location
Virginia
More skilled folks will chime in but these rigs are known to have grounding problems. Check your ground connections at the chassis and engine block.
 

Fless

Staff member
Moderator
Joined
Apr 2, 2017
Posts
16,654
Reaction score
34,467
Location
People's Republic of Colorado
The first thing I'd do is verify what's low or missing -- ground or power -- and go from there. You could use a fairly high amperage test light (say, 4A or so) and test the connector terminals using a good 12v source, then a known good ground, and that would tell.

Or temporarily substitute a ground to see if that's the cause.
 
Last edited:

Forum statistics

Threads
138,100
Posts
1,999,083
Members
103,026
Latest member
26AT4
Back
Top