2010 and 2011 LT or LS owners - need your input

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
Was trying to replace some painted body side moulding and the business I ordered it from sold me 2007-2011 item, but I think there is a problem.

When the mouldings arrived they were too thin and didnt look like the moudlings from a 2011 Tahoe.

I just drove around to all the new car lots and looked at 2011 LT Tahoes and Suburbans and they have the new wider (taller, about 3.7 inch tall) mouldings - and upon closer look it appears to be the same mouldings from a current and late model Silverados.

I couldnt find a 2010 on any used car lot but the 2007-2009 all have the thinner mouldings that is not as tall (about 2.5 inch tall).

Before I complain to the place I bought the mouldings from, I would like to be sure I know what I am talking about.

Can someone with a 2010 and someone with a 2011 go measure the approximate height of your color body side mouldings? (LTZ owners with chrome - yours are different.)

Thanks in advance,
 

OuPhiDelt

TYF Newbie
Joined
Aug 9, 2011
Posts
3
Reaction score
0
Location
Oklahoma City
Mine are just under 4". I have the Z71 pkg, but I don't think that changes the body side moulding size.

(2011 LT)
 

felixgun

Full Access Member
Joined
Oct 7, 2010
Posts
9,746
Reaction score
136
Location
Lafayette, LA
The body colored side moulding (non chrome) for 07-08 are way different then the newer 09+ body colored side moulding.
 

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
Yes the 07-08/09 moldings are about 2.5" tall. The moldings on my '11 are close to 4" and they have a slight wave/indention to them.

Not sure if this shows enuff, but these are on my 2011 lt

a6890f6a-cd21-b81f.jpg



Here's one from an '08. Hope this helps


a6890f6a-cd45-8424.jpg
 
Last edited:
OP
OP
C

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
Yes the 07-08/09 moldings are about 2.5" tall. The moldings on my '11 are close to 4" and they have a slight wave/indention to them.

Thanks for the photos - anyone with a 2010 that can chime in here?
 

soulsea

Elite Member
Joined
Feb 19, 2011
Posts
11,857
Reaction score
667,430
Location
Bar
I think the wider moldings started in 09 not 10 ... mine was an 09 and the ones I just took off are the same as the new ones.

Michael, the best way to get the part you want is the following ... go to a dealership and go to their new car/truck lot, find a truck with the moldings (or any other part) you want, write down the VIN no. Then take that to parts dept. and let them input it in their computer. That's how these guys know what to order, most of them have no idea as to what part fits one year or the other. So the VIN on their computer spits out the part you want. When the part is color sensitive make sure you get the vin from a like colored vehicle. But in this case the side moldings come primered/not painted so just give them the VIN from any vehicle that has the moldings you want. Then when they give you the part number you can either order it there or take it with you to order on the net. :waytogo:
 
OP
OP
C

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
I think the wider moldings started in 09 not 10 ... mine was an 09 and the ones I just took off are the same as the new ones.

Michael, the best way to get the part you want is the following ... go to a dealership and go to their new car/truck lot, find a truck with the moldings (or any other part) you want, write down the VIN no. Then take that to parts dept. and let them input it in their computer. That's how these guys know what to order, most of them have no idea as to what part fits one year or the other. So the VIN on their computer spits out the part you want. When the part is color sensitive make sure you get the vin from a like colored vehicle. But in this case the side moldings come primered/not painted so just give them the VIN from any vehicle that has the moldings you want. Then when they give you the part number you can either order it there or take it with you to order on the net. :waytogo:

I tried the VIN trick already - no matter what VIN from 2011 they use from an LT or an LTZ the only part they can come up with has the chrome - go figure. Maybe, the dealer doesnt know how to look it up or maybe no one buys the unpainted ones. I told them I thought by law GM had to make parts for everything and they said not any more.
 

soulsea

Elite Member
Joined
Feb 19, 2011
Posts
11,857
Reaction score
667,430
Location
Bar
I'll PM you the VIN of my Hybrid after coffee and a couple of errands.
It has the stock moldings you're looking for.
 
OP
OP
C

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
I'll PM you the VIN of my Hybrid after coffee and a couple of errands.
It has the stock moldings you're looking for.

Got it.


Does anyone have thier old mouldings they would like to sell or trade :hmm:
bonus if they are already black ????
 
OP
OP
C

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
i know. :(

we've already discussed this. :(

Actually, I was just informed by the 'accounting office' (AKA wife) that if the price was fair I could sell mine. I will PM you once I get around to getting them off in good condition.

Does anyone know the fair price for the following:

'11 LTZ mouldings (4 pieces)
'11 LTZ chrome grille (full / not insert) upper w/ gold bowtie
'11 LTZ chrome grille (full / not insert) lower (larger one)
'11 LTZ chrome tow hooks (2) *very heavy (shipping warning)
'11 LTZ chrome mirror covers (2)
'11 LTZ chrome door handles (4)
 

soulsea

Elite Member
Joined
Feb 19, 2011
Posts
11,857
Reaction score
667,430
Location
Bar
I paid around $300 for the moldings at the dealer with a 25% off coupon, also around $300 for the chrome handles.
 
Last edited:

THE YETI

Director of Operations
Supporting Member
Joined
Apr 29, 2009
Posts
26,989
Reaction score
14,984
Location
South FL
moldings arent gonna be worth much since the adhesive will be yanked. $100 give or take?
 
OP
OP
C

c5corvette

Member
Joined
Jul 29, 2011
Posts
77
Reaction score
1
that's what i was figuring.

Here is what I am figuring...

$110 > '11 LTZ mouldings (4 pieces)
$153 > '11 LTZ chrome grille (full / not insert) upper w/ gold bowtie
$146 > '11 LTZ chrome grille (full / not insert) lower (larger one)
$83 > '11 LTZ chrome tow hooks (2) *very heavy (shipping warning)
$92 > '11 LTZ chrome mirror covers (2)
$160 > '11 LTZ chrome door handles (4)

... these are half the price of new or less on each - seems fiar.

Anyone who might be interested can PM me.

Where on this forum can I post these for sale - is there a classifieds section?
 

Forum statistics

Threads
137,766
Posts
1,991,583
Members
102,756
Latest member
dizhai

Latest posts

Back
Top