2/3 drop kit on a 2018 PPV?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ghost10

Full Access Member
Joined
Feb 16, 2017
Posts
620
Reaction score
254
I've had good service from Diablo and Lenox. I've probably seen those and just assumed they were for masonry without actually reading the labels.
I use Lenox stuff at work never had any issues but Diablo has been ️ for me
 

17Betty

TYF Newbie
Joined
Feb 13, 2022
Posts
9
Reaction score
2
the only reason you have to cut the lower ball joint threads is if you're running a certain size wheel or smaller. also be prepared to cut the upper control arm threads off as well to clear the axel if your new ride is four wheel drive.
 

MrMonte

Full Access Member
Joined
Jun 23, 2022
Posts
163
Reaction score
353
On my 2018 Yukon I cut the upper balljoint to clear the front axle. Used a dremel & tool less than 1 min. Didn't have to touch the lower but I have factory 22s
 

Forum statistics

Threads
128,785
Posts
1,805,362
Members
91,764
Latest member
tomcoop

Latest posts

Top