03' Yukon Body Drop

[pats hoe]

Thanks! What are you doing about the rear?

this is the one im going with.
http://www.andysautosport.com/chevrolet/2000_2004_tahoe/exterior/roll_pans/fbi/fbiz00180268.html

 

[BOSS]

Well, I won't be using a hitch then! Who makes the best roll pan in your opinion?

I like the street scene, it has some contour to it instead of being totally flat.

B

 

[89 chevy]

Here is a pic I took today. This is my favorite pic!

 

[fatnlowtahoe504]

get street scene rollpan like mine

 

[thehoe92]

what size tires?

 

[TEXAS DEMON]

grant kustoms, sir mike and carriagen underworks. for the roll pan

 

[highrollin113]

looks great, you have a suspension drop too? how do you find the ride?

 

[89 chevy]

Tires are 285/45/22. I think im going to go with the street scene like your's fatnlow. I origionally had a DJM 3/5 drop kit, but then we body dropped it as well. The ride is still good, but you can tell that the suspension has been messed with. You can hear things in the floor more since there isn't much between the body and the frame, but I guess that's the price im going to pay to have it sit lower. Im definatly going to have to roll the rear quarter panel lips, because it rubs sometimes now. Thanks for the complements

 

[retorq]

That's cool, I hate that I have that big frame section showing now that I removed the steps. :|

 

[89 chevy]

If your in it for the ride, a body drop is probably not for you, unless you put S10 Body mounts on it!

 

[retorq]

I drive a truck, I'm not in it for the ride .... or the fuel mileage. LOL

 

[89 chevy]

Haha, well then a body drop is gonna work good for you! haha

 

[TEXAS DEMON]

a few years ago in a diferent forum i had come up with an idea to use the cabin semi truck air bag mounts to adjust a bodydropped truck. it can be done but its a big hassel. but good job on the tahoe.

 

[El Brando]

Looks so good man! Do the S10 body mounts make it that much better?

 

[pats hoe]

I was looking underneath yesterday and right in front of the body mount near the front door i only have maybe 1 inch till body hits the frame .Did you have to massage the sheetmetal alittle on yours to get more room to get it to drop?Thats the only area that looks close .

 

[89 chevy]

No, we had to move that big loom of wire to the one side of the frame. The amount of drop differ's about a half inch from the rear to the back. Thanks for the complements!

 

[pats hoe]

alright i saw that too,im thinking of making a small bushing up to go between out of a set of old body lift i got.I wont get it as low but it should help in irde alittle bit.Thanks again

 

[chip]

looks good!

 

[MeanGreen03]

Looks good!! What year of S-10 body mounts would be needed?

 

[89 chevy]

Im not sure, I could find out for you tho.