I actually found that the donut shaped/ round rubber seal where the driveshaft enters/ exits the case was the leak. I replaced it a while ago and never came back and updated the post.
Ive done a bit of reading but have not found all the answers to my questions. I have a 2004 Gmc Yukon Denali and it has a clutch fan. It had been replaced within the last year along with a cold case radiator, belt, and etc but it is loud when driving most of the time I turn the a/c on. I want to...
So I fixed the problem with the temp sensor ( The sensor actually didn't melt like I thought, after getting the old on out I saw that it corroded and seized up. ) I installed a 1/4 by 1 1/2 brass nipple from Home Depot into my return line to my reservoir but it did not solve the issue with...
What Buggdave said makes sense now that think about it but question the size of the hose going the surge tank from the radiator didn't change so what's different in the radiator that creates this issue? Also Fless I have GMT569A with the oil and transmission coolers.
I literally was just letting the truck run for 45 minutes thinking there was air in the system and that's why it wouldn't get up to temp but my heat was hot. Now I have to replace the temp sensor in the driver side head because I unplugged it and it melted on the spark plug shield that fast. But...
So I have a 04 Yukon Denali and the radiator has been leaking for a while along with the water pump. Ive owned the truck since Oct 2015 and this is my second time replacing the water pump and my first time replacing the radiator. Intinitally I knew the radiator was leaking but after I while I...
Hey I have a 04 Denali and my factory muffler has rotted through finally and its time to replace it... Problem is I can't seem to find the exhaust diameter size online that may be right. Ive seen 2.5, 2.75, and 3.0 inches. I haven't been under the truck yet to measure it myself and can't find a...
Appreciate it. More for the list. Bad part is it looks like I'm only gonna have 1 day to do it because it'll be gone on the 21st and work and fathers day will have me tied up
I have a 2004 Denali and have a buddy that's about to junk one because he has 2 so he told me to pay him and I can come take whatever I need off of it before he gets rid of it. But he has an 03. My question is what should I definitely take besides the list of parts that I already have. I do need...
Thanks for all the feedback everyone I appreciate it. I went with the Timkens and installed them yesterday along with a pair of bilstein 5100 shocks in the rear. But now I'm almost certain I have transfer case noise (and not a good one). Its an audible roaring noise at speeds above 10/15 mph and...
Thank for the information. Ive never used timken or skf and didn't know that. Yeah mevotech has me raising an eyebrow looking at it. Is this the general consensus among the forum members now? I just read a post and someone else said timken also. They didn't give any reason as to why like you did...
2004 GMC Yukon Denali Awd.
I've always been a Moog guy for certain parts but I'm on the rock auto site and am about to order hubs but I see that the mevotech is heavy duty and the Moog is standard replacement. So I'm wondering does that mean that its better than the Moog parts. Ive never heard...
So I have a 04 Denali that I've had for a few years and always wanted to lower. The rear air shocks I don't want. Pump burned out not long after being replaced probably as I have not heard it cycle on for quite a while. But Ive looked at the forum numerous times whenever I wanted a question...
Just wanted to update this post. As of today (3/14) I picked the Denali up this morning from the shop. Turned out to be the bearings in the front diff. Dropped it off a week ago the shop called a couple of days later and informed me that it was the bearings after teardown that were done for...
Hey everyone I have a 04 Denali Awd and its time to replace or rebuild the front dif. Remans cost as much as a trans here in IL ($1300 on the low side) and I can get a used one for about $400 and put it in myself but from the reading I've done rebuilding has been made to seem like a complicated...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.