Search results

  1. T

    Static out of rear speakers

    I meant to say it is still fed through the factory Bose system.
  2. T

    Static out of rear speakers

    I have a 2004 Yukon XL with a Pioneer X3800 with the PAC RP5 for a little over 3.5 yrs. I have been having a static and a kinda scratching sound coming from rear speakers that comes and goes. It started about 1.5-2 yrs ago. Mainly sounds like the right rear speakers. It would come on a random...
  3. T

    03 Yukon slt awd with 4 low

    Here is a write up I found about it. NR4 Transfer case- Transfer Case Description and Operation: The Borg Warner (BW) model 4482 NR4 transfer case is a two-speed, full time 4WD, transfer case. The transfer case has an external planetary type differential, which has two different sets of...
  4. T

    03 Yukon slt awd with 4 low

    I have the same NR4 transfer case. It has served me well with anything I have needed it for. I have had it driving on the beach in the Outer Banks and have had no issues other than the first time I took it out there and did not have the traction control off.
  5. T

    AWD Shift Selector Problem

    I also found this searching about the stabilitrack system. I do know if the system senses wheel slip it will cut power to the engine and you cannot give it more gas. I found that out the hard way the first time I drove out on the beach in very soft sand. Now anytime I drive on the beach I...
  6. T

    AWD Shift Selector Problem

    I pushed the stabilitrack button last night and the only thing it did was a single chime, said stability sys disabled, and had the t/c light up in the dash. They both stayed on until I hit the button again to turn it back on.
  7. T

    AWD Shift Selector Problem

    I don’t recall hearing a noise when I hit the top button. I’m thinking it’s more electronic as it disables the stability and traction control. I will have to check later when I get a chance.
  8. T

    Just bought a 2004 Yukon XL 2500

    Where in Virginia did you find this one?
  9. T

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did you have to change the alignment bolts? Where did you end up getting the UCA? I’m going to need to replace my passenger side as well.
  10. T

    Bombsquads 05 Denali build..... sorta

    Where did you get vinyl for the hood from?
  11. T

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I actually have two different ones. I bought one of the cheap obd scab tools and just a free app. It was ok. It would pull engine codes and could clear them but that was about it. Amazon was having a sale on the BlueDriver for around $75 and I bought that one. It definitely has more options...
  12. T

    Static and popping from speaker.

    I pulled the speaker out and looked at the connection and all looked good. I turned on the radio without the speaker connected and I heard the loud static. I’m not sure where it was coming from. I don’t know if I just didn’t hear the others as much or what but it seems as though that one has...
  13. T

    Static and popping from speaker.

    I’m planning on looking at that speaker today if all works out to check rust and the connections. Nothing new has been done recently. I have noticed sometimes that when I have been sitting there waiting in the Yukon with the key out and everything off that sometimes the info display will...
  14. T

    Static and popping from speaker.

    A little more information is I’ve had this installed for about a year and it just now has started with the noise.
  15. T

    Static and popping from speaker.

    I have just recently started to have static and popping out of my back left speaker. It does it when the sound is on and also when it is down to zero volume. Sometimes it’s worse than others. Does anyone have any ideas on a fix for it? I have a Pioneer AVH-X3800BHS head unit with the PAC...
  16. T

    Has anyone used airlift 1000 kit with Moog 81069 springs?

    I had the same issue as I tried installing them outside of the Yukon. The original coil was wider and shorter than the 81069 spring I replaced it with. I finally got them straight “enough” and just left them in and has been running them for at least 5000 miles and have had no issues. I’ve had...
  17. T

    2" lift with smooth ride.

    I replaced the front shocks with Bilstein 5100’s and the springs in the rear around the same time. My wife and me both feel it rides better. It has a little firmer ride to it.
  18. T

    2" lift with smooth ride.

    I installed the Z71 springs in the rear to help with towing our travel trailer. Initially it raised the rear right at 2”. I kept the nivomat shocks in the rear. I’m not sure if it has settled more since then or not as I don’t remember the measurements from then nor have I measured in a while. I...
  19. T

    Blend door actuator

    Right I don’t mind spending the money on them but I just more or less wanted to know if that is what people are using.
  20. T

    Blend door actuator

    On my 2004 Yukon xl the drivers side acts up sometimes. It will start blowing hot air. I can turn it off and start it back up and it works fine after that. I have done a relearn and it didn’t work. I have taken it apart and cleaned the grease off the contacts and put new grease on and it worked...
  21. T

    Good body repair stuff

    What waterproof filler are you suggesting?
  22. T

    TruCool Max Fittings and Hardline

    Do you have the factory cooler? If so I just used two of the above fittings and one compression fitting. On the left line I cut it and rotated it 180 degrees so it will go right into the trucool port. These are the fittings I used So it’s one of the left fitting and two of the right fittings.
  23. T

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    What size hose clamp would you recommend?
  24. T

    05Single's virgin build thread. 03 tahoe

    What kind of pads did you go with?
  25. T

    P0156 code

    I’ve just started getting the p0156 code. I haven’t seen that code very often when doing a search. From what it looks like it’s the O2 sensor bank 2 sensor 2. I got the code and had it on for about two days then I cleared it just to see if it came back. After a day of driving it it came back...
Top