Search results

  1. B

    2007 Steering Wheel replacement

    Hi. Trying to get a new steering wheel for my 07 Suburban, p/n 15917931. Cannot seem to locate one, and GM sites all list as "backorder". I can find wheels for 2010-2014 trucks; is there any way to use those wheels? Can I sway my clock spring and air bag to the newer wheel? I'd assume the...
  2. B

    07 Suburban Front Spring Upgrade

    Hi All, I am looking for a set of front spring to make the front of my 07 Sub LTZ a little stiffer (a more sporty feel). I currently have 2in. drop spindles and the McGaughy coil relocators with stock LTZ coils. Are the any companies who sell a stock-height HIGHER RATE front coil spring...
  3. B

    Wheel Offset explained??

    Hi guys, hoping somebody can help me understand wheel offset. If my truck ('07 Suburban) has 20x9 wheels with a +30 offset, and I were to install a set of 22x9.5 with a +30 offset, would the extra .5 inch be inboard or outboard? Mark
  4. B

    22 inch wheels

    Hey guys. I am currently looking at 22 inch wheels for my 07 Burban (truck is lowered 3.5 inches front, 4.5-5 inches rear). The wheels I am looking at are the GM Replica ck158 (22x9 with +31 offset) or the DUB Skillz (22x9.5 with +31 offset). I am wondering what the fitment will be like...
  5. B

    Front Strut Spacers

    Don't know if this has been done or a silly question. IF I were to use front coil relocators or the strut mod and found it to be too low, could I then add the Bellltech spacers to the top of the stock spring to raise a little? Mark
  6. B

    Shock Diameter

    Does anyone know the diameter of the Arnott/Bilstein front strut (that replaces the Autoride ones)? I would like to buy a set of the McGaughys strut relocators, but they list 2 P/Ns - one for a LD, one for a HD strut I actually called Arnott; they said "you can't use our shocks on a lowered...
  7. B

    Autoride Links and Spacer

    Hey guys. Have an '07 2wd Autoride Burbn; I am using the Belltech 2in spindles front, and BT 3/4 spring in rear (spacer is currently in). The Belltech Autoride links are shortened as much as possible currently. I am wanting to lower the truck another 1inch front and back. 2 questions...
  8. B

    Blowing Fogs

    Hey guys. In the last month, I have gone through 3 fog light bulbs (Putco) on the RIGHT side only!? I'm beginning to think there is a short in the wiring harness - anyone know to where that harness connects and how easy it would be to replace? I think GMpartsdirect sell it for like $10. Mark
  9. B

    Custom Tune

    Hey guys, Looking for some advice regarding the custom computer tunes - when you guys get these done, are you always deleting the 8 cylinder-to- 4 cylinder shut off (DOD)? When the truck runs 8 cylinders all the time, is MPG still improved with the new tune? Mark
  10. B

    Belltech Camber kit

    Guys, my '07 Burban is currently lowered 2" front with Belltech spindles. I have just ordered a new set of the Arnott struts and plan on going down another 1" (for a total front drop of 3"). Will I need the Belltech camber bushings at the 3" level to get it into alignment? Anyone have any...
  11. B

    Free Travel Bump Stop

    Anyone know the Brand and part number for the bump stop to use when you do the free travel mod? Mark
  12. B

    Front Autoride - New OEM or Arnott??

    Hey guys - I have an '07 Autoride LTZ Burban, lowered 2/3 currently. I have already replaced the rear shocks with the Arnott's that maintain autoride; Yes, I would like to maintain autoride. I am now looking into replacing the front shocks on the truck; Which are better shocks in terms of...
  13. B

    Free Travel on Suburban

    Guys, has anyone done the free Travel Mod on a Sub or XL? If so, does the fuel tank need to be dropped to get the right side completely removed from the frame? Just wondering if this job is maybe easier on a short-body due to different tank location? Mark
  14. B

    07+ Autoride Struts - FRONT

    Looking for like new condition, low miles, complete front autoride struts x2 Mark
  15. B

    22 inch tire size

    Currently have an 07 Sub lowered 2/3 (considering going to 3/4). Would a 305/45/22 work with either ride height, or would there be a lot of rubbing at the 3/4 height? Mark
  16. B

    Front Strut Mod vs. springs?

    Hi guys. Working with an Autoride truck that I would like to retain Autoride on. Trying to figure what would be the real difference b/w using Tony's strut mod or simply installing the Belltech front springs (for a total 3" drop with spindles). Both methods would result in the strut shaft...
  17. B

    Front Autoride

    Looking into possibly changing the front struts on my 07 2wd LTZ Sub. Does anyone know what the difference is b/w the ORANGE and BLACK Autorides? Can you interchange them? Mark
  18. B

    Front Control Arm Bushings

    So I already have the Belltech spindles on my 07 Suburban and am now planning on installing the front springs (bought the 733BLT kit). I only want to get 1 inch lower out of the springs, so my question is - Do I really need to install the camber bushings included with the kit? As far as I can...
  19. B

    Belltech 733blt (3/3-4)

    Has anyone here lowered their Tahoe/Yukon/Burban 3-4front/3-4rear and used the Belltech spindles AND drop springs? What are your thoughts on the ride? Any problem with struts after using the drop springs? I'm thinking that using stock struts with a mild 1" drop spring (in addition to the...
  20. B

    Free Travel

    Can someone please let me know if this Mod would be necessary for an 07 Suburban (Autoride) with the BT 3/4 kit installed? The reason I ask is b/c I think I recall reading that that kit only lowers the rear of Autoride truck 3.5" and I'm not sure if the bracket removal is necessary at that...
  21. B

    Disable front autoride only?

    Hey guys, have recently installed the Belltech 2/3-4 kit on my 07 Burban. I am now thinking I want to go lower in the front and it has been suggested not to use the Belltech 1-2" front springs (not sure why). I am considering the Belltech adjustable front struts; if I go this route, can I...
  22. B

    Sway bar end links

    Hey guys, I just got my Eibach sway bar kit. I was surprised that it did not include new end links. My truck is an '07 LTZ Autoride Suburban, lowered 2 inches front and 3 inches rear. My question is - Do I need shorter links at this amount of lowering? Where can I get shorter links that will...
  23. B

    Autoride vs. Magneride

    Could someone please tell me what is the difference b/s Auto vs. Magneride? Which of GM's vehicles have the Magneride? (If I were guessing, I'd say the Cadillacs only have the Magneride) Mark
  24. B

    New Autoride Shocks

    Hey guys, found out recently that both rear Autoride shocks on my 07 Suburban LTZ are leaking from the air bladders. Would this result in a "bouncier" than normal ride? Also, looking at a company called Arnott Industries, who sell 2 reman. OEM shocks for $379 - anyone used this company for the...
  25. B

    Auotride Settle?

    Hey guys, recenlty noticed that the Autoride compressor sometimes comes on when I am driving, or stopped at lights. Even if I shut off the truck for a short period (ex. t get gas), the compressor will come on when I restart. If I measure after the 1st compressor cycle, then shut the truck off...

Forum statistics

Threads
129,259
Posts
1,812,961
Members
92,360
Latest member
csan2879

Latest posts

Top