I custom made a front splitter to compliment my PPV front lip. Using ply wood I cut out the desired shape, coated it with fiberglass resin and the many multiple coats of bed liner to further seal it. It’s mounted to the bumper frame in the front and the rear underpan by the wheel wells. Very solid, which was a challenge to achieve with the PPV lip which has no under flanges. First pictures is raw plywood so you can see the actual shape, the black disappears in pictures.
After that I cut in some dual Silverado exhaust bezels, I wanted an OEM plus look. They are currently not active, dual exhaust is on the list of future mods, but I needed the output location set before I could have that fabricated.
Future exterior styling mods are hopefully GMC declads in satin black. Or possibly some rear PPV style steelies with a 9 or 10” wide rear and a fat tire in the back. (Stocks up front). I’m leaning toward the declads though because I want the Silverado/PPV brembo upgrade. But the fat tire rear is also one of my priorities so I may have to have the rear declads widened.
After that I cut in some dual Silverado exhaust bezels, I wanted an OEM plus look. They are currently not active, dual exhaust is on the list of future mods, but I needed the output location set before I could have that fabricated.
Future exterior styling mods are hopefully GMC declads in satin black. Or possibly some rear PPV style steelies with a 9 or 10” wide rear and a fat tire in the back. (Stocks up front). I’m leaning toward the declads though because I want the Silverado/PPV brembo upgrade. But the fat tire rear is also one of my priorities so I may have to have the rear declads widened.
