Recent content by neosoul

  1. N

    Forged or Welded Lower Ball Joints

    Hey guys thanks for all your replies, hey Maribor you must have been reading my mind cause I was also thing about where to get the lower control arms for my 98 2dr 4x4.
  2. N

    Forged or Welded Lower Ball Joints

    Hey guys, I have a 1998 2dr 4x4 chevy tahoe. I'm looking to order new lower ball joints for my truck. How can I tell if I need to order forged or welded lower ball joints? What's the difference? Is one stronger or heavier duty than the other?
  3. N

    Rims for 285/75/16 Tires

    I'm looking for factory wheels to go with my 285/75/16 tires. Previous owner has wheels with the wrong offset which makes my tires rub. Can I install something like the hummer h2 or h3 rims & not have the tires rub? Any suggestions on other rims would be greatly appreciated. I'm on a budget &...
  4. N

    Front Suspension Cost in Las Vegas

    First off sorry for the late response but I was very sick for awhile. The issues I'm having with my truck is that it drives like a boat. I can turn the steering wheel about 4-6 inches before it responds. The truck wants to drift to the right while driving. It has roughly 163,000 miles on it...
  5. N

    Front Suspension Cost in Las Vegas

    Do you have a pars list by chance
  6. N

    Front Suspension Cost in Las Vegas

    Can anyone give me a rough estimate of what a complete front suspension should cost me here in Las Vegas? Just trying to see what I should roughly be expecting to pay before I take my truck in. It's a 2 Dr four wheel 98 tahoe.
  7. N

    Can A 6 Or 8 Spped Automatic Transmission Be Mated To Our 5.7L

    Looking to see if its possible to mate a 6 or 8 speed transmission to our 5.7L engines. If so which ones that anyone know of that has heen doneb& what would be required & who sells kits that would facilitate this swap. Thank-you.
  8. N

    Best Shorty Header For Our 5.7L

    What would be the best, most efficient shorty header for our 5.7L motors. Looking for headers that will give me the best hp gains.
  9. N

    1999 Yukon Denali Front Bench In 98 2Dr Tahoe

    thanks for the reply, I appreciate it.
  10. N

    4" superlift with 3/4 ton rear leaf springs?

    well I’ve decided not to lift the truck after all even tho the idead has grown on me after seeing some tahoes with a 4’” lift. my plans are to completely rebuild the suspension including shocks along with a energy suspension master kit. I am going to replace the rear leaf springs, I like the...
  11. N

    4" superlift with 3/4 ton rear leaf springs?

    one last question, would it hurt to add a steering stabilizer since I've gone from the stock 265/75/16s to 285/75/16
  12. N

    4" superlift with 3/4 ton rear leaf springs?

    I think both of you may be correct, I rub both in front & rear when I turn the wheel 3/4 & drive over those parking lot speed bumps. The shocks are definitely shot both front & rear. The truck is not currently lifted and I don't do any off roading. The truck is being built to do some occasional...
  13. N

    4" superlift with 3/4 ton rear leaf springs?

    well after further reading it looks like the 3/4 rear springs will fit but looks like I will only get about a couple of inches of lift in the rear. I've read that maybe I will also need a shackle flip to bring it level. Is this correct?
  14. N

    4" superlift with 3/4 ton rear leaf springs?

    hey guys I'm looking to purchase the 4" superlift kit because my 33" tires rub like crazy on my 98 2dr tahoe. What I was wondering was can I swap the springs in my truck to 3/4 ton springs to bring my truck level with the front. I do not want to use blocks at all in the rear to bring the truck...
  15. N

    1999 Yukon Denali Front Bench In 98 2Dr Tahoe

    Can someone at least tell me if I'm correct as to whether or not the seat would slide forward to gain access to the rear of a 2 dr on the powered version of the 60/40 bench seat.

Forum statistics

Threads
129,124
Posts
1,810,807
Members
92,209
Latest member
hdheffel01
Top