intergalactron's latest activity
-
II used to think that, too…until a lifter failed at 115k miles
-
Iintergalactron replied to the thread RTV dabs on Valve Cover Gasket?.I don't know if it's recommended or not, but I can't image you'd hurt anything by adding some silicone in strategic spots. As long as...
-
Iintergalactron reacted to Eraschaub's post in the thread Still a good idea to get the Range AFM/DFM disabler for 2015-2020 Yukon Denali with 6.2? with
Like.
A lot of GM truck and SUV owners still recommend using a disabler on the 6.2 trucks, mainly because of the lifter concerns tied to... -
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.Well, the squeak is no more. Changing the CV axle fixed it. The outboard joint on the old axle was kinda sloppy when it was out of the...
-
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.I suppose its possible, but I didn't see anything like a gouge or etc. on the rotor.
-
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.I read somewhere that you can replace the CV axle with out taking the brakes and bearing hub apart. Is that correct? Also, are both...
-
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.I completely get your sentiment here, but... If the CV joint is the squeaker, I would be adding grease to confirm that it is the...
-
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.I would have, but now you've lost your chance.
-
Iintergalactron replied to the thread [SOLVED] Pesky Squeak.How do you put a stethoscope on a rotating cv axle?
-
II have been chasing what I thought was a brake squeak on my 2020 Tahoe. But I have eliminated anything directly connected to the...
-
Iintergalactron replied to the thread Minnesota / St Cloud Recommendations for DOD AFM Delete? 2018 Yukon Denali 68K Miles.The last one I did, I got my parts from BTR (Brian Tooley Racing). I bought 90% of what I needed there. But you're going to need some...
-
II did the job myself on my 2012 and upgraded the cam with a non-AFM cam and lifters. It cost me about $2,000 in parts and a tune, but I...
-
Iintergalactron replied to the thread I want some rumble... I think....Got a part # on that muffler?
-
Iintergalactron reacted to Lil Timmy Shy's post in the thread I want some rumble... I think... with Like.
I'd recommend a recording and some big speakers. That way when it gets old you can turn it off.
-
Iintergalactron replied to the thread Differential damage due to tire tread?.My opinion is that you'll be fine. That's what diffs are for. If you're really worried about it, put the mismatch on the front (I'm...
