shakedown067
Full Access Member
- Joined
- Dec 2, 2014
- Posts
- 152
- Reaction score
- 83
Swapping to color-matched door handles. Hope to get the front doors installed tomorrow. Will have to find a rear hatch handle later.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,866
- Reaction score
- 19,750
Swapping to color-matched door handles. Hope to get the front doors installed tomorrow. Will have to find a rear hatch handle later.
Color match looks good. Cleaner.
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,866
- Reaction score
- 19,750
BillBlatt18
Full Access Member
Have some chrome depos on the way! Had black ones in and wasn't too sure how I liked it. Sent them back and ordered chromes[emoji108]
Sent from my iPhone using Tapatalk
jcevans7
Full Access Member
Changed out the knock sensors. YouTube was good leading me to believe about 2 hours would be enough. It was not everything was good minis I broke this guy.
I have a game called whafs this name...
it connects to the fuel regulator
Sent from my SM-N910T using Tapatalk
I have a game called whafs this name...
Sent from my SM-N910T using Tapatalk
#1taho
5150TAHO
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,866
- Reaction score
- 19,750
Sweet! Pics after install.
#1taho
5150TAHO
For sure 
, I will do before and after shots for everyone.
, I will do before and after shots for everyone.
chevync
Full Access Member
Washed it, didn't trust the dealership to wash it a few weeks ago when I bought it.
seven9st surfer
Full Access Member
Got my Morimoto Mini H1 7.0s in today, hoping to finish up the retrofit this weekend if my adapter plates show up.
#1taho
5150TAHO
Did you get the part you broke and finish the job?? If so how does it run ? better ?Changed out the knock sensors. YouTube was good leading me to believe about 2 hours would be enough. It was not everything was good minis I broke this guy.
I have a game called whafs this name...it connects to the fuel regulator
Sent from my SM-N910T using Tapatalk
jcevans7
Full Access Member
Had to jerry rig the fuel vacuum line. If I'm wrong by the name let me know trying to find one online. I used some heat shrink tube it works in a pinch but not a long term solution. Here is a better pic of the line.
Sent from my SM-N910T using Tapatalk
Sent from my SM-N910T using Tapatalk
#1taho
5150TAHO
To bad you are so far away. I would give you one. Any local wreckers should have one.Had to jerry rig the fuel vacuum line. If I'm wrong by the name let me know trying to find one online. I used some heat shrink tube it works in a pinch but not a long term solution. Here is a better pic of the line.
Sent from my SM-N910T using Tapatalk
BillBlatt18
Full Access Member
seven9st surfer
Full Access Member
Did a lot. Washed and waxed after last weekend's road trip. I designed and made a center console organizer out of 1/8" HDPE. Attached a Grid-It organizer to the underside of the lid of the console. I also made a magnetic iPad mount out of more HDPE and an old Scosche mount I had laying around that slips into the CD slot of my head unit. And I swapped out my XB35 ballasts for the XB55. And I test-fired and sleeved the high-beam triggers for my new Morimoto Mini H1 7.0 projectors. All I'm waiting for to finish that retrofit is the adapter plates.
Last edited:
seven9st surfer
Full Access Member
And a few from my test fire last night. Sorry for the crappy cell pics, but you get the idea.
#1taho
5150TAHO
Before
After
This is how it should have came.
15 minutes to take off the old glass and corners and reinstall. I took off the old third tail light off and put the screws back in so no water got in. Pull the harness out and unhook and hook the new one on. Quick and easy.
After
This is how it should have came.
15 minutes to take off the old glass and corners and reinstall. I took off the old third tail light off and put the screws back in so no water got in. Pull the harness out and unhook and hook the new one on. Quick and easy.
raviel119
Member
Looks great! I get a little jealous at seeing all your guys mods. I have an Esky and I feel at times there's nothing for me to do. Lol. I have all those things you guys mod to. I do have to replace my clear eyes taillights soon I like the look of yours. Maybe they make a version for the Escalade?
#1taho
5150TAHO
I am sure there are. Mine came with the truck but I have seen them in multiple different styles. Caddy is the best. I just not a fan of the AWD. But love the rest.
#1taho
5150TAHO
Getting into the Christmas spirit
