Kelderman air ride front alternative

[shundal]

I just ordered the universal bags for the front a few days ago and still deciding on using the trailblazer rear bags. Did you go with factory or aftermarket trailblazer rear bags?


Sent from my iPhone using Tapatalk

 

[NORCAL SS]

Try to find a tbss airbag set up. Ride height is lower down on them also. That's what I've been setting up the back of these trucks up for years with.

Arnott has bags brand new also I've had good results with

 

[shundal]

Are these the correct arnott ones ? http://pages.ebay.com/link/?nav=item.view&alt=web&id=370809041935&globalID=EBAY-US


Sent from my iPhone using Tapatalk

 

[NORCAL SS]

You can use thise. Tbss airbag ride height is 1 to 1.25 lower than those

 

[shundal]

Do you happen to have a part number ? Can't seem to find any


Sent from my iPhone using Tapatalk

 

[Ogediah]

TBSS bags should be PN 25815604


Sent from my iPhone using Tapatalk

 

[kwb0748]

What's the cost of the rear kit?

 

[NORCAL SS]

What's the cost of the rear kit?

When inset these up done right

1 djm hardware kit with bumpstops 195 ahipped
2 belltech sp shocks 135
3 spohn compete rear bar kit 630

Then bags are like 185 and airlift wireless air with fittins 250

 

[TBucks]

When inset these up done right

1 djm hardware kit with bumpstops 195 ahipped
2 belltech sp shocks 135
3 spohn compete rear bar kit 630

Then bags are like 185 and airlift wireless air with fittins 250

Hey Im new to this forum but I previously ordered a belltech 2 inch drop spindle and 3 inch lowering springs from you maybe 2 years back for my 2007 Yukon Denali but now I want to bag it and get it as low as possible without cutting anything cosmetic. Im running 26s so can you send me a dm of prices and part numbers for everything I would need to do this. I want to bag the front and rear and be able to tow easier. Since my compressor on my airride went out Im just ready to re do everything. You can even shoot me an email at [email protected] if thats easier. Thanks!!

 

[crotonevans]

nasty, what are you using for bags on rear

 

[TBucks]

Well I just scored on a barely used Kelderman full front and rear kit for my denali on ebay for 250 bucks shipped.... Yahtzee!!!

 

[NathanJax]

Well I just scored on a barely used Kelderman full front and rear kit for my denali on ebay for 250 bucks shipped.... Yahtzee!!!

Holy CRAP!!!

 

[kwb0748]

I was looking at those. Was a little afraid of them being discontinued, but should be a great score

 

[Rpav]

Well I just scored on a barely used Kelderman full front and rear kit for my denali on ebay for 250 bucks shipped.... Yahtzee!!!

Well I just scored on a barely used Kelderman full front and rear kit for my denali on ebay for 250 bucks shipped.... Yahtzee!!!

did you install them yet? what components do you have on your ride so far? looks pretty low. i have a denali as well

 

[yates ™]

Well I just scored on a barely used Kelderman full front and rear kit for my denali on ebay for 250 bucks shipped.... Yahtzee!!!

That is stupid cheap. I would have bought it just to have around for that price

 

[TBucks]

I have a belltech 2 inch drop spindle and 3/4 lowering springs in the rear. The kit is in great shape.

did you install them yet? what components do you have on your ride so far? looks pretty low. i have a denali as well

Im gonna do a little more than originally planed. Called Kelderman and asked if I could do the kit with my 2 inch drop spindles but the tech told me it drops it too low for the wheel wells. Well looks like Ill be rolling and tubing the front and rolling the rear and making new wells. Going to put spohn aftermarket upper and lower control arms for the rear and clean up all the frame and mounts and paint everything fresh.

Have a connection at airlift so probably gonna run their new system. Will probably start this project after the new year Since we are Spending our holidays and new year in Maui.

 

[NathanJax]

I have a belltech 2 inch drop spindle and 3/4 lowering springs in the rear. The kit is in great shape.



Im gonna do a little more than originally planed. Called Kelderman and asked if I could do the kit with my 2 inch drop spindles but the tech told me it drops it too low for the wheel wells. Well looks like Ill be rolling and tubing the front and rolling the rear and making new wells. Going to put spohn aftermarket upper and lower control arms for the rear and clean up all the frame and mounts and paint everything fresh.

Have a connection at airlift so probably gonna run their new system. Will probably start this project after the new year Since we are Spending our holidays and new year in Maui.

I ran my Kelderman kit with drop spindles for a week or so, and then went back to stock spindles. It will sit on the inside wheel well HARD but you could technically do while tubing the front.

 

[kwb0748]

I am looking for a front kit if anyone has one for sale.

 

[Rpav]

I have a belltech 2 inch drop spindle and 3/4 lowering springs in the rear. The kit is in great shape.



Im gonna do a little more than originally planed. Called Kelderman and asked if I could do the kit with my 2 inch drop spindles but the tech told me it drops it too low for the wheel wells. Well looks like Ill be rolling and tubing the front and rolling the rear and making new wells. Going to put spohn aftermarket upper and lower control arms for the rear and clean up all the frame and mounts and paint everything fresh.

Have a connection at airlift so probably gonna run their new system. Will probably start this project after the new year Since we are Spending our holidays and new year in Maui.

nice bro! im super jelly.

so for everyone reading this. i called kelderman and they discontinued the kit cause they were having a hard time sourcing the bags as needed. they said they were getting the bags from ridetech.

if you wouldnt mind, could you see if the bag has a part number or anything on the bags? also, they said if I can get the bags they would fab me up the mounts.

currently i'm at 4/6 on my awd denali. mcgaughys spindles and belltech coils up front and tonys 6" spring in rear but i want to see how low I can get it. before I bag im gonna see if i can get it down 2 more inches. I have coil relocators to try out and some djm lower arms to try out. for the rear when i bag i picked up ridetechs rear kit and gonna see if that works out for what im looking for.

thanks bro!

 

[kwb0748]

I am using universal air Strut bags on mine in the front....