What did you do to your NBS GMT800 Tahoe/Yukon Today?

[WILLFG]

Finally installed bump stops on to the rear axle....

Truck is lowered 3/5.5 and did not have bumpstops when I bought it.

 

[Big Buttons]

Bought 2 12" type r's from a friend becuase I got real tired off not having bass in my truck lol.

 

[Smoke Em All]

I installed this double din Pioneer DVD player I got from Tahoewhat. I must give him some props for tolerating all my questions and helping me trouble shoot a few issues. All in all I need to wire in the steering wheel control module and install the antenna adapter and I'll be ready to move on to my stepper motors and LED conversion.

Sent from my HTC One_M8 using Tapatalk

 

[Tahoewhat]

View attachment 27826
I installed this double din Pioneer DVD player I got from Tahoewhat. I must give him some props for tolerating all my questions and helping me trouble shoot a few issues. All in all I need to wire in the steering wheel control module and install the antenna adapter and I'll be ready to move on to my stepper motors and LED conversion.

Sent from my HTC One_M8 using Tapatalk

I dont mind at all. Glad it got all figured out. Looks good

 

[Yukongk]

Seafoamed the engine today. Started smoking while I was still spraying it into the throttle body. Let it sit for a few minutes and started her up. She smoked, and when I got onto a main road, a huge cloud of white smoke appeared behind me lol. After that not much smoke at all. I thought she would smoke longer than that?

 

[NCTyphoonKid]

Replaced the sensor on top of the dash for my DRL's they work now but had to enlarge the hole for it

 

[Smoke Em All]

Technically it was last night but, I tried my hand at replacing my own stepper motors in the gauge cluster. Not really as bad as I figured and seems to be working just fine. Next week I'll be doing an LED conversion.

Sent from my HTC One_M8 using Tapatalk

 

[Stocco]

Removed ground affect trim piece from front and removed my running boards. Would look great lifted but may still slam it.

 

[livingez_123]

I put new tires on today. Cooper Discoverer HTP's in 275-55-20.

 

[Bomba02]

Got a new steering gear box installed and pitman arm, truck is like new. Its awesome!

 

[NeverSatisfied]

Cleaned her up after the rain was done. Been raining off and on for the past week

 

[Smoke Em All]

Cleaned her up after the rain was done. Been raining off and on for the past week

Looks great!! what grille is that btw? Looks like the pickup grille bit I didn't think they fit?

Sent from my HTC One_M8 using Tapatalk

 

[Big Buttons]

It's the HD Silverado grill. He had to cut the lower portion of the grill for it to fit. Or you can get the bumper along with it but you have to do some major cutting and welding for the bumper.

 

[Smoke Em All]

May consider doing this mod I like it!!

Sent from my HTC One_M8 using Tapatalk

 

[NeverSatisfied]

It's the HD Silverado grill. He had to cut the lower portion of the grill for it to fit. Or you can get the bumper along with it but you have to do some major cutting and welding for the bumper.

To make it fit with the stock bumper cap just trim about an 1" off the bottom. I plan to do the bumper to make it the full conversion soon

 

[boozer]

Looks great all cleaned up. More rain for the next three days though. Better enjoy it today. Lol.

 

[Pachanga02]

Looks good Cody on the 375s.

 

[NeverSatisfied]

Looks good Cody on the 375s.

Thank you sir

 

[Z-56 Hoe]

It's the HD Silverado grill. He had to cut the lower portion of the grill for it to fit. Or you can get the bumper along with it but you have to do some major cutting and welding for the bumper.

no you don't you can swap a GMC sierra front bumper and valance and have those nice big round fogs too!

oh yeah did three dyno pulls Saturday!

 

[Tahoewhat]

no you don't you can swap a GMC sierra front bumper and valance and have those nice big round fogs too!

oh yeah did three dyno pulls Saturday!

Sides dont match the fenders if you use the gmc bumper. if i remember right.