OP
OP
GalaxyBlackEsky
BlackedoutLT3
LOL. I don't like chrome that much.. Plus no matter what BBK I am getting they will be yellow.
Project Z06 Brake Upgrade
- Thread starter GalaxyBlackEsky
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Smokymance
Boosted
+1 on the yellow/blk wheels!!!
look at me talking...still rollin on them stock 20s!
look at me talking...still rollin on them stock 20s!
OP
OP
GalaxyBlackEsky
BlackedoutLT3
Even though I am selling the kit I was at least able to show that NNBS trucks can us the Z06 BBK with these brackets.
Smokymance
Boosted
can you send me the guys screename on performance trucks, i searched for him and didnt find one...even tho im not the best at searching forums
Brent we need to get you away from this black wheel obsession...
Once you go black.........
Goodinblack
I Like Tacos
The ones on the silver lade 
bolting the caliper on to the bracket is easy. But once you get that rotor on there and realize how the caliper sits in proportion to that rotor... now that would be showing something. Mine bolted up just fine too until it came time to put the rotor on. Then we had to do all sorts of grinding and machining.
Wish this coulda went further and the wheels cleared that caliper. Would have liked to see it completed.
I say screw the brakes for now and start colormatching/eliminating that chrome.
OP
OP
GalaxyBlackEsky
BlackedoutLT3
Yeah. But didn't you have the older design? But anyway. We will see what happens.
Smokymance
Boosted
I knew it. Too easy!!!!
OP
OP
GalaxyBlackEsky
BlackedoutLT3
Well Z06's are sold and 16"ers are on the way.
Goodinblack
I Like Tacos
So sad
- Joined
- Jan 3, 2011
- Posts
- 50,967
- Reaction score
- 19,478
That's the part about trying new things and sometimes you don't know til you try
Goodinblack
I Like Tacos
Agreed. All is not lost though. We know know that this will work with stock type 22s.
- Joined
- Jan 3, 2011
- Posts
- 50,967
- Reaction score
- 19,478
That's true as long as everything lines up correctly like with rotors and calipers as Robbie pointed out.
yukondoit
Stay Classy
OP
OP
GalaxyBlackEsky
BlackedoutLT3
Yeah. I wish I would have been able I finish. Just to see if it was possible. But to me I think it def is a possible way to make it work. From my reading the Mghs spindles were the hardest out of the spindles to install and Beltechs were easier as install and grinding wise.
By any chance do you remember what the part number for the rotors you were going to use? I've been trying to do this for a long time and have talked to Rudy as well, but wasn't sure if they would work with the Baer Eradispeed rotors that i already have.
Similar threads
