Show off your 2015-2020 lowered tahoes and yukons

[DJMB337]

Shout out to everyone who’s posted on here. Lots of helpful info. I just ordered a 2/3 MaxTrac kit for my 2015 Yukon. And I’m being a 6Parker copycat and also ordered 24” Strada Coda wheels. Pics coming soon.

 

[6Parkers]

Shout out to everyone who’s posted on here. Lots of helpful info. I just ordered a 2/3 MaxTrac kit for my 2015 Yukon. And I’m being a 6Parker copycat and also ordered 24” Strada Coda wheels. Pics coming soon.

I love mine. They are easy to keep clean and I still love the look of them!

 

[DJMB337]

Excuse the dirty truck, been getting lots of rain around here lately. 24” Strada Coda wheels wrapped in 305/35/24 Faulken rubber. Maxtrak lowering springs all around. Suppose to be a 2/3-4 drop, but I’m not sure how much the actual drop was since I did the wheels at the same time.

 

[6Parkers]

Excuse the dirty truck, been getting lots of rain around here lately. 24” Strada Coda wheels wrapped in 305/35/24 Faulken rubber. Maxtrak lowering springs all around. Suppose to be a 2/3-4 drop, but I’m not sure how much the actual drop was since I did the wheels at the same time.

Looks great. Any rubbing at all? I wish I had went with 305/35's instead of 295/30's

 

[DJMB337]

I’ve noticed the front inside will rub the fender liners a little near full lock, but it hasn’t been bad.

 

[Bigkevschopshop]

Got some new wheels, cant complain...

 

[MIKEYSOTO]

View attachment 389223Bagged? If not, what drop? Looks sick!

 

[Iemlegend]

Anybody looking for a drop kit and some 24’s? Great deal. Check it out.
View attachment 339776
View attachment 339777
View attachment 339778
View attachment 339779
View attachment 339780
View attachment 339781

This set of 24” wheels, tires and 2”/4” drop kit and it needs a home. Anybody interested or know of anyone?
Giovanna 24" Wheels w/ Pirelli Scorpion Zero 285/35ZR24 tires. Set of 4. Good condition. 1 yr old with 11,*** miles on them. 50% tread left. 2 of the 4 wheels have minor curb rash that has been touched up and hardly noticeable. These wheels new are $2,500 and the tires new are $1,550. Only asking for $1,850. I’m not sure how to ship this much weight so local pick up might be the only way unless there is a trusted carrier. Will fit any GMC/Chevy/Cadillac 1500 Tahoe, Suburban, Yukon, Denali, Sierra or Silverado or Escalade. 6 on 5.5 bolt pattern. ALSO,
I have a Belltech 2/4 drop kit. The drop kit consists of a front 2” drop spindle, a rear 4” lowering spring and 2 drop down brackets to relocate the rear shocks. $550 value. Comes with the wheels & tires. I’ll post a few pics too. Located in San Diego, CA. $1,850 OBO


Sent from my iPhone using Tapatalk

Oh how I wish this was still available

 

[twister]

2019 Tahoe LS with MaxTrac 2” springs out back and their lowering struts up front set to 1”. So it should be a 1”F and 2”R drop, but it’s actually about 3/4”F and 2 1/8”R. Still has noticeable rake, which is what I wanted, but it reduces the wheel gap significantly. Ride is unchanged.

 

[olyelr]

2019 Tahoe LS with MaxTrac 2” springs out back and their lowering struts up front set to 1”. So it should be a 1”F and 2”R drop, but it’s actually about 3/4”F and 2 1/8”R. Still has noticeable rake, which is what I wanted, but it reduces the wheel gap significantly. Ride is unchanged.

3-4” drop up front? Huhhhhhh?

 

[twister]

3-4” drop up front? Huhhhhhh?

3/4” drop. Three-fourths of an inch. 0.75”

 

[olyelr]

3/4” drop. Three-fourths of an inch. 0.75”

Ahhhhhh…that makes sense lol. I totally read that wrong haa.

 

[twister]

Ahhhhhh…that makes sense lol. I totally read that wrong haa.

Yeah, that photo would be a pretty disappointing 3-4 inch drop!

 

[DJMB337]

Just some random pics I took.

 

[JML07denali]

Maxtrac reverse leveling kit 2 inch drop in the rear.

 

[89Suburban]

Maxtrac reverse leveling kit 2 inch drop in the rear.
View attachment 403663

 

[JayBee23x45]

Slight drop on mine, but came out exactly the way I wanted. I didn't wanna replace spindles and also didn't want 2" drop.

Rear - Belltech 34324 no spacer, Arnott shocks.

Front - Arnott Struts, I replaced the springs with Maxtrac 1" drop springs 251510-8.

Rides smoother then when it was new.





View attachment 360951

You got 1” drop in front and in the rear 3” or 4”… love the look. Stock with a touch of drip

 

[JayBee23x45]

2/4 MaxTrac K331524

View attachment 222365

View attachment 222438

WHAT DROP YOU HAVE ? WHAT HEADLIGHTS ARE THOSE THEY ARE SICK AF, 22's I ASSUME ?

 

[Mullyman]

This is exactly how out white 2015 sits. And I like the slight slope of the roof as well.

is that all you did was change the springs?

 

[Slow5.0]

Does anyone have issue if bouncing rear end after Tonys 2/4 drop kit. My rear end is hard. I know autoride shocks are still good but its getting worse after 2 years