What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,181
Reaction score
51,390
Location
Central Jersey
This is the stock 6.0 cam. Anyone know if it's still good?
20200914_150516.jpg

Lobes look good to you guys? No flat lobes or anything like that. I was just wondering about wear.
 

wjburken

Elite Member
Supporting Member
Joined
Dec 26, 2017
Posts
10,313
Reaction score
29,536
Location
Eastern Iowa
This is the stock 6.0 cam. Anyone know if it's still good?View attachment 257625
Lobes look good to you guys? No flat lobes or anything like that. I was just wondering about wear.
How does it mic out? Is it still in spec?

Can’t see any obvious issues, but then again I’m looking at it on my phone. If you put a straight edge across each lobe, can you see light between the straight edge and the lobe?
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,181
Reaction score
51,390
Location
Central Jersey
How does it mic out? Is it still in spec?

Can’t see any obvious issues, but then again I’m looking at it on my phone. If you put a straight edge across each lobe, can you see light between the straight edge and the lobe?
Didn't even get that far. Came out of the 03 motor I bought. I don't want to toss it if it's still good.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,526
Reaction score
47,959
Location
Stockton, Ca.
Counterfeit! Send it to me--I'll get rid of it for you ;):D
lol, first person that came snatched it up, she didn't even test drive it, she showed up I gave her the key, she started it up for about 5 seconds, shut it off and pulled out the cash, lol
I said you don't want to test drive it? she say's no it sounds good. ok..... haha
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,181
Reaction score
51,390
Location
Central Jersey
the 2004 suburban it has 235,850 on it I listed it for $4k, a few scammers hit me up right off the bat, she messaged and asked if it was $4000 I said yes but I will take 3800, shit I paid 3k for it 7 years ago lol
Good deal!
she didn't even ask any questions about it, just pulled out the cash, ok I'll get the paperwork. then she left and had to go get some one else to help drive it away, she split and left the title and bill of sale, I was like o_O I must look trustworthy I guess lol
You just have one of those faces :crazy:
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,526
Reaction score
47,959
Location
Stockton, Ca.
Good deal!

You just have one of those faces :crazy:
I don't know I just made sure I too care that there were no problems with it before I listed it, got it smoged yesterday, put new tpms sensors on it and fixed the air bag warning and a couple used tires I figured that way they couldn't come up with a way to jew me down.
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,918
Reaction score
14,578
Location
Chicago
she didn't even ask any questions about it, just pulled out the cash, ok I'll get the paperwork. then she left and had to go get some one else to help drive it away, she split and left the title and bill of sale, I was like o_O I must look trustworthy I guess lol

It's about to get used as a getaway car. Did you get a photo of her with the truck for the cops?
 

Sam Harris

Elite Member
Supporting Member
Joined
Sep 26, 2018
Posts
7,445
Reaction score
14,977
Location
Texas
I'm going with the flow right now, and see what's what when it's all said and done. I don't think he's gonna screw me--but--if he tries I will correct him and question it. All I can do for now is go with the flow. Keep you guys updated with any news.
Is he going over the new motor in the Esky? How many miles? Did /does it run? I sure hope he dissects that motor before slapping heads on it.
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,918
Reaction score
14,578
Location
Chicago
Finished the brake project tonight. All new rears, NNBS fronts. New AC Delco performance calipers painted with POR15, R1 concepts rotors/pads, goodridge lines.

20200914_213014.jpg


I used the Goodridge rubber clamps to route the lines. I also cut the factory ones (and hit them with high heat black, wth), so i could retain the spot to clip the wheel speed sensor cable.

20200914_212942.jpg


20200914_212905.jpg


Also touched up the red on the tires. With the calipers, center caps, and tires, I figure I'm around +10hp per corner now. Will get some daylight shots and do the bedding tomorrow...

20200914_221508.jpg
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,526
Reaction score
47,959
Location
Stockton, Ca.
Finished the brake project tonight. All new rears, NNBS fronts. New AC Delco performance calipers painted with POR15, R1 concepts rotors/pads, goodridge lines.

View attachment 257629

I used the Goodridge rubber clamps to route the lines. I also cut the factory ones (and hit them with high heat black, wth), so i could retain the spot to clip the wheel speed sensor cable.

View attachment 257628

View attachment 257627

Also touched up the red on the tires. With the calipers, center caps, and tires, I figure I'm around +10hp per corner now. Will get some daylight shots and do the bedding tomorrow...

View attachment 257630
nice!, notice any difference stopping?
 

Bear77

Full Access Member
Joined
Aug 9, 2017
Posts
557
Reaction score
756
Location
South FL
she didn't even ask any questions about it, just pulled out the cash, ok I'll get the paperwork. then she left and had to go get some one else to help drive it away, she split and left the title and bill of sale, I was like o_O I must look trustworthy I guess lol
Guess she knew what she wanted!


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
137,724
Posts
1,990,482
Members
102,714
Latest member
briannorris

Latest posts

Back
Top