What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Sam Harris]

View attachment 250154 View attachment 250155
View attachment 250156

A friend let me throw these on today to see if they rub after I lowered it some more. I'm sitting at 33 in front and 33.5 in rear on 285-45-22 tires.

Looks great! So rub or no rub? Have you had to do any trimming prior?

 

[mattbta]

Got it put back together with all these parts. Started right up! Now to drive a bit and make sure I don't lose coolant. Then after a couple oil changes, send out to Blackstone. Idle is still a little rough and hot oil pressure around 35 but I didn't expect improvement since this was just top end stuff. Might do an oil pump at some point, just hoping there isn't bearing wear.

1 706 ADV CYLINDER HEADS 706
1 6504 MOREL LIFTERS
2 MAH-54441 CYLINDER HEAD GASKET
1 RNB-56390 COOLANT BYPASS SEAL
1 LIL-44180 FAN CLUTCH SPANNER WRENC
1 ICB-551696 BOLT KIT LS HEADER
1 FEL-61070 TB GASKET
1 FEL-72401 PICKUP TUBE O-RING
1 MAH-VS50250 VALVE COVER SET
1 ARP-912-0011 CLEANING TAP FOR LS1
1 ARP-912-0001 THREAD CLEANING TAP
1 ARP-134-3610 GM LS2 HEAD BOLT KIT
1 RFL-2008 EXHAUST GASKET
1 ADO-213-363 ENGINE CAMSHAFT POSITION
1 ADO-D8055 ENGINE OIL LEVEL SENSOR
1 ADO-213-4514 ENGINE COOLANT TEMPERATU
1 FEL-OS30693R OIL PAN GASKET SET
4 12595365 VALVE LIFTER GUIDE
1 551733 LIFTER GUIDE BOLTS
1 PT1798 ECT PIGTAIL
1 F107SX DRAIN VALVE
1 551680 OIL PAN BOLT SET
1 DWA142TH TAP HANDLE
1 63880 3/8" TORQUE WRENCH
1 15179498 UPPER RADIATOR HOSE
1 56500 LISLE TERMINAL TOOL
1 CAPRI TWO WAY AIR GUN
2 41-110 DELCO IRIDIUM PLUGS
1 12563918 OIL LEVEL TUBE
1 11610259 COOLANT PLUG HEAD
​

 

[rgosart]

Put new brake pads on all the way around, adjusted my parking brake shoes, and greased the front end. Trying some Wagner Thermoquiet pads this time. I used AC Delco pads last time I did the rears and they made a lot of noise. Hopefully this fixes that problem!

 

[Rocket Man]

Got it put back together with all these parts. Started right up! Now to drive a bit and make sure I don't lose coolant. Then after a couple oil changes, send out to Blackstone. Idle is still a little rough and hot oil pressure around 35 but I didn't expect improvement since this was just top end stuff. Might do an oil pump at some point, just hoping there isn't bearing wear.

1 706 ADV CYLINDER HEADS 706
1 6504 MOREL LIFTERS
2 MAH-54441 CYLINDER HEAD GASKET
1 RNB-56390 COOLANT BYPASS SEAL
1 LIL-44180 FAN CLUTCH SPANNER WRENC
1 ICB-551696 BOLT KIT LS HEADER
1 FEL-61070 TB GASKET
1 FEL-72401 OIL PUMP
1 MAH-VS50250 VALVE COVER SET
1 ARP-912-0011 CLEANING TAP FOR LS1
1 ARP-912-0001 THREAD CLEANING TAP
1 ARP-134-3610 GM LS2 HEAD BOLT KIT
1 RFL-2008 EXHAUST GASKET
1 ADO-213-363 ENGINE CAMSHAFT POSITION
1 ADO-D8055 ENGINE OIL LEVEL SENSOR
1 ADO-213-4514 ENGINE COOLANT TEMPERATU
1 FEL-OS30693R OIL PAN GASKET SET
4 12595365 VALVE LIFTER GUIDE
1 551733 LIFTER GUIDE BOLTS
1 PT1798 ECT PIGTAIL
1 F107SX DRAIN VALVE
1 551680 OIL PAN BOLT SET
1 DWA142TH TAP HANDLE
1 63880 3/8" TORQUE WRENCH
1 15179498 UPPER RADIATOR HOSE
1 56500 LISLE TERMINAL TOOL
1 CAPRI TWO WAY AIR GUN
2 41-110 DELCO IRIDIUM PLUGS
1 12563918 OIL LEVEL TUBE
1 11610259 COOLANT PLUG HEAD​

That lists an oil pump, pan gasket and pan bolts. Did you have a shop do the work? If so, it looks like they did replace the oil pump. Edit: that Fel-72401 is the o-ring so that must be what got replaced?

 

[mattbta]

That lists an oil pump, pan gasket and pan bolts. Did you have a shop do the work? If so, it looks like they did replace the oil pump. Edit: that Fel-72401 is the o-ring so that must be what got replaced?

I did the work. I pulled the pan because it had a little bit of sludge on the bottom. So, for good measure (and it was cheap enough) replaced the o-ring and pan gasket even though they were a tad under two years old.

 

[DenaliReyes]

Replaced the November 2014 NAPA battery with a MARCH2020 Optima yellowtop . No more weird battery gauge needle, no more dim when using window switches.

 

[05Single]

Funny, my wife was trying to tell about the same thing! Rather get it fixed instead of throwing a bandaid on it.


Sent from my iPhone using Tapatalk

Lol of course , was just picturing that guy from the commercial yelling then slapping a patch on your roof

 

[DenaliReyes]

I broke the plastic cover of the driver side mirror light....and now

$77!!!! FOR THIS POS PLASTIC PIECE!?!?!?!?!


lol
Sorry for yelling but damn.

 

[Tonyrodz]

I broke the plastic cover of the driver side mirror light....and nowView attachment 250244$77!!!! FOR THIS POS PLASTIC PIECE!?!?!?!?!


lol
Sorry for yelling but damn.

How bad is it broken? Might be able to fix it.

 

[Rocket Man]

I broke the plastic cover of the driver side mirror light....and nowView attachment 250244$77!!!! FOR THIS POS PLASTIC PIECE!?!?!?!?!


lol
Sorry for yelling but damn.

Junkyard time

 

[DenaliReyes]

Junkyard time

I wish, there aren't many 05o or close to it Yukon denalis or Tahoe's up in Detroits junk yard. These are driven until they are burned.

How bad is it broken? Might be able to fix it.

The cover piece fell off during g a car wash. The light still works it's just missing a cover. I'll post a pic soon

 

[GJones]

I broke the plastic cover of the driver side mirror light....and nowView attachment 250244$77!!!! FOR THIS POS PLASTIC PIECE!?!?!?!?!


lol
Sorry for yelling but damn.

I had to drill out a screw on both lights. And I’m p sure the passenger side has a short maybe.


Sent from my iPhone using Tapatalk

 

[Antdogbmx]

lets see

Used the bottle jack and some wood to realign the bumper on passenger side

Took of the center caps and getting ready to paint them

Painted the other mirror black (WILL BE REDOING IT)

Next try to figure out my A/C issues

 

[DenaliReyes]

placed a new battery and all outside lights to LED
Under$380 plus the battery

 

[Rocket Man]

View attachment 250264 View attachment 250265 placed a new battery and all outside lights to LED
Under$380 plus the battery

I just got a headache looking at that screenshot.

 

[CJ Rodarme]

Took some time yesterday to give my rig a much needed wash... just to have it rain out of nowhere 2 hours later lol. I also threw the old stock mirrors back on, I still haven't decided if I like them better or not.



I was on the way to the store today and had my ABS light come on out of nowhere. My wheels rubbed through my ABS wire, never thought of that happening because until now all my wheels had negative offset. Until I can get a new wire in, is this okay to drive on? I'll get the new wire ordered today, but can I drive on it like this for the next few days?

 

[dubyagee01]

Took some time yesterday to give my rig a much needed wash... just to have it rain out of nowhere 2 hours later lol. I also threw the old stock mirrors back on, I still haven't decided if I like them better or not.

View attachment 250266

I was on the way to the store today and had my ABS light come on out of nowhere. My wheels rubbed through my ABS wire, never thought of that happening because until now all my wheels had negative offset. Until I can get a new wire in, is this okay to drive on? I'll get the new wire ordered today, but can I drive on it like this for the next few days?

View attachment 250268 View attachment 250267

That looks routed wrong.

 

[CJ Rodarme]

That looks routed wrong.

it was, probably still is. I’m trying to find a picture/diagram for it rn

 

[DenaliReyes]

I just got a headache looking at that screenshot.

I couldn't load more than 5 pics at one time.
Now we all cross eyed lol

 

[DenaliReyes]

BrightAF!

I have to adjust the beams, need to find a flat wall. And measure out. Have to look up the numbers on here to get it right. Also the fogs are pointing to low I think.

The DRLs would be on but it has to be in gear gear. Not just on Drive with brake on.