Tonyrodz
Resident Resident
On its way.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bye bye baby see ya soon.....
treehan77
TYF Fiend
.
W00t!! Finally!
Are it 6.0 on the schedule?
915_Tahoe
Your GM Parts Specialist
Nice, i might grab it up. he's asking $100 obo, hope the millage isn't way off from mine.
Tonyrodz
Resident Resident
Yes sir, another one.Are it 6.0 on the schedule?
You could always get it reprogrammed. Don't you get a discount from work?
915_Tahoe
Your GM Parts Specialist
I tried that, i got a denali cluster and they couldn't get it to change the millage with the tech2. so i let it on the truck had 10k more then my original cluster, i could send it in to our vender but cost would be like $170 but i would get a reman cluster with the correct millage. all i do is send mine in for core exchange.
Tonyrodz
Resident Resident
I see what you mean. PITA!
Got a few LEDs in more will be here Saturday along with new brighter high/low beams, DRLs, fogs and turn signals. OH! And the amp for my subs
This hoe has to be the best thing I’ve purchased. She still doesn’t have a name
This hoe has to be the best thing I’ve purchased. She still doesn’t have a name
DenaliReyes
Full Access Member
DenaliReyes
Full Access Member
I recently changed the canister.
Mainly because I kept getting a p0455 code, also changed the purge valve and the vent solenoid, also the gas cap.
One pic shows a line that I noticed had charcoal pellets inside when I took it off.
It sucks if i have to take down the gas tank. Prolly run a vacuum and hope that picks them up
DenaliReyes
Full Access Member
I changed the front and rear suspension. I think I put the bypass modules on the wrong place because inkeep getting check suspension on the dash.
DenaliReyes
Full Access Member
Replaced driver side mirror. But asking for a refund because...... lol
DenaliReyes
Full Access Member
Painted the speaker grill covers black.
You can disconnect them at both ends and use an air compressor to blow them out.
The resistors connect across the 2 wires that go to the connectors at the top of all 4 shocks. The fronts have a weird looking connector. Cut the connectors off and wire resistors across the 2 wires. At all 4 shocks.
Some of the aftermarket ones are like that but I know how expensive the ACDelco ones are. You might not have it snapped all the way in. Try getting one hand behind it as much as possible and push all around on the center of it from the outside, or try to look in there to see if one of the clips isn’t snapped in. Sometimes you think they’re all snapped but they’re not, which causes the funhouse effect.
DenaliReyes
Full Access Member
I contacted the ebay vendor and they gave me a refund and was told just keep it. Lol funhouse mirroring for a while then. I might take it apart and see if just the mirror can be placed on the oem set. Will see.
Try removing it and reinstalling it. Like I said sometimes it’s the mirror, sometimes it’s not snapped all the way in, so check your work.
Sheesh. Great quality..!
Similar threads
