4 door fender flares???

[riviera rider]

do they got them for the 99 tahoe? i know the ones off the burbans and the pick up trucks wont work because that back door is too close do they make them for the 4 doors?

 

[nine5yukon]

check my sig, these are made by Xenon for tahoe/yukon 4dr and you just missed gettin them cheeeeap. sold them on ebay two mos ago...

 

[haks310]

Sure do. Check out Bushwacker fender flares.

 

[xX Mavr1ck Xx]

http://www.tahoeyukonforum.com/forum/showthread.php?t=2979&highlight=bushwacker
theres pics of someones

 

[riviera rider]

nine 5 can u send me bigger pics because mine will be getting painted also (the truck is going chameleon) and im running adapters on the 28s and dont like the way they poke out so im figuring fender flares mite look good if painted on it

---------- Post added at 12:11 AM ---------- Previous post was at 12:07 AM ----------

for 300$ and up im saying forget the flares.... if someone got a set of used or a set laying around let me know but i dont think the poking of my rims is gonna bother me enough to spend 300$ on flares lol

 

[nine5yukon]

the bushwackers look too offroadish to me, sorry i dont have any larger pics on this comp.

here are some xenon 1.75" like mine below, they make a 3" also but its kinda 4x4 too imo.
http://cgi.ebay.com/ebaymotors/95-9...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[riviera rider]

ok thanks ya i like the way they look but not diggin the prices, thought they would be around 175/200$ not 400/500$ lol

 

[BigDaddy13440]

Adapt the 2-door flares for your 4-door - they'd look like the Bushwacker cut-outs with the exposed screw caps.

http://www.tahoeyukonforum.com/forum/showthread.php?t=6825

 

[bluebear15]

ok thanks ya i like the way they look but not diggin the prices, thought they would be around 175/200$ not 400/500$ lol

ya i've been wanting some flares too and agree the price for those is wayy to much lol

the 99-00 z71 obs tahoes came with flares from the factory. could go to the junk yard and see if they have any that you could take.

 

[riviera rider]

i mite go to the junk yard and find some off a 4 door and just modify them to work on the 4 door

but is that tahoe a 4 door???

---------- Post added at 08:51 PM ---------- Previous post was at 08:48 PM ----------

oh and ya im not doing my shit that ghetto as the guy did above haha, i just looked at those pics, im painting my truck chameleon so really would like something not too rigged up, need something thats going to look good even when the doors open because my truck will be entering alot of shows this summer

 

[bluebear15]

Adapt the 2-door flares for your 4-door - they'd look like the Bushwacker cut-outs with the exposed screw caps.

http://www.tahoeyukonforum.com/forum/showthread.php?t=6825

hmm good idea but wasnt executed right.... i might look into this but i'd do a better job and make it look cleaner

 

[wicked2000]

Mine is a 00 z71 4 door and these come stock on them

 

[BigDaddy13440]

hmm good idea but wasnt executed right.... i might look into this but i'd do a better job and make it look cleaner

[/COLOR]oh and ya im not doing my shit that ghetto as the guy did above haha, i just looked at those pics, im painting my truck chameleon so really would like something not too rigged up, need something thats going to look good even when the doors open because my truck will be entering alot of shows this summer

Gee, thanks for the compliment. So glad to see that offering up a possible solution means that some ungrateful, insufferable punk-ass with no respect for someone else is free to pass judgement on what someone else has done.

Time to grow up, and a get a clue.

Oh, and learn English. ******* morons. TXTing isn't a language.

 

[BEAST]

Gee, thanks for the compliment. So glad to see that offering up a possible solution means that some ungrateful, insufferable punk-ass with no respect for someone else is free to pass judgement on what someone else has done.

Time to grow up, and a get a clue.

Oh, and learn English. ******* morons. TXTing isn't a language.

Clue on what? How to take some deck screws and a hack saw and make a POS an even bigger POS?

 

[bluebear15]

Gee, thanks for the compliment. So glad to see that offering up a possible solution means that some ungrateful, insufferable punk-ass with no respect for someone else is free to pass judgement on what someone else has done.

Time to grow up, and a get a clue.

Oh, and learn English. ******* morons. TXTing isn't a language.

sorry if i just want to have a clean look instead of the bolts/screws/nails sticking out. never put you down in my post, i only said it didn't look clean. never gave any indication of disrespecting you in any way.

oh and my post wasn't in texting language. as you can see i didn't use any abbreviations or any of that crap. sure i didn't capitalize stuff or use good grammar but if you haven't noticed most people don't capitalize or use the far extent of perfect (or close to) grammar on forums. my post was easily read and understood so before you go bitching people out just look around and accept it. if you cant understand the post due to horrible grammar or by the use of texting language then you have the right to ***** them out for it but this is not the case here.

 

[BigDaddy13440]

sorry if i just want to have a clean look instead of the bolts/screws/nails sticking out. never put you down in my post, i only said it didn't look clean. never gave any indication of disrespecting you in any way.

oh and my post wasn't in texting language. as you can see i didn't use any abbreviations or any of that crap. sure i didn't capitalize stuff or use good grammar but if you haven't noticed most people don't capitalize or use the far extent of perfect (or close to) grammar on forums. my post was easily read and understood so before you go bitching people out just look around and accept it. if you cant understand the post due to horrible grammar or by the use of texting language then you have the right to ***** them out for it but this is not the case here.

BB - I DO owe you an apology. I read Riviera's post about my truck being ghetto (blah,blah,blah), and lumped your post in with it.

I would've used the factory mounting brackets and screwed them to the body for a much cleaner look, but the truck I took the flares off of had an enormous amount of brown cancer..... I do think they'd look much better without the screw heads showing (which is why the fronts already have screw caps). The back flares will be removed when I do some bodywork to fix my crunched rear quarterpanel, and screw caps will be used then.

My intention is to use some Urethane sealer to smooth the transition from the flare to the body, and then spray the entire truck with Al's Liner, a product much like Rhino Liner, but in a more economical, at-home application.

My Tahoe is used for work, carry tools and materials as a General Contractor. I'm not concerned with getting it "pretty".