What did you do to your NBS GMT800 Tahoe/Yukon Today?

[95escahoe]

Ended up using Digital Dash Solutions. Didn't do it through eBay though. Just emailed the guy directly and worked out a deal. Packaging was really nice and I shipped it off on Tuesday and had it back the next Monday. It has the white needles so the blue shows through.

Got this installed today.
View attachment 74098

Great looking cluster & great place to deal with had him rebuild my OBS cluster


Sent from my iPhone using Tapatalk

 

[MadDogDelpho]

Put on the new Texas edition badges from Amazon and they look great.

 

[DDenali]

I installed some Mormoto H1 projectors for my Co worker he is besides himself now lol


Sent from my iPhone using Tapatalk

 

[Rocket Man]

Haven't done it yet, but whose running one of these CAI's? On the fence about grabbing it. I don't really have any HP mods, Just kinda want that CAI suck noise when I floor it. Lemme know your guys' opinion on this setup.

http://www.ebay.com/itm/290648553483?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

That's a Spectre knock-off, just has a crappy filter. I've heard a few guys here that have used it and it seems to be OK. I would replace the filter itself personally with a name brand but then it's close to the price of the Spectre.

 

[DDenali]

Put on the new Texas edition badges from Amazon and they look great.View attachment 74101View attachment 74102

Freaking awesome bud damn that looks good


Sent from my iPhone using Tapatalk

 

[bottomline2000]

Yea, so I can utilize the stock air box. But I won't pay $150 for a name brand MIT

I have an air raid MIT with I'm going to sell cheap but it's for a gmt900..bought the wrong one and forgot it was in the garage lol.[emoji12]

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[kwOH]

I have an air raid MIT with I'm going to sell cheap but it's for a gmt900..bought the wrong one and forgot it was in the garage lol.[emoji12]

Sent from my SAMSUNG-SM-T377A using Tapatalk

I might need that? How cheap?


Sent from iPhone 7 plus using Tapatalk Pro

 

[Rebelmyers]

Thanks, i actually managed to get the drivers side all wired up today, i leveled it out using 2- 6mm washers...looks much better than the passenger side. Hopefully i can finish the passenger side tomorrow if it's not freezing out again

Also got the cluster blue =)

View attachment 74053

What bulbs did you use


Sent from my iPhone using Tapatalk

 

[Rebelmyers]

Ended up using Digital Dash Solutions. Didn't do it through eBay though. Just emailed the guy directly and worked out a deal. Packaging was really nice and I shipped it off on Tuesday and had it back the next Monday. It has the white needles so the blue shows through.

Got this installed today.
View attachment 74098

Curious what that needed costing


Sent from my iPhone using Tapatalk

 

[BigDaddy13440]

How's the Spectre one working for ya. I was watching that one too, cuz it looked the same but was 3 times as much. I can't see an air intake tube being worth the hundreds that the big boys get for theirs. If I'm gonna drop all kinds of money on intake, it's gonna be some sort of forced air.


Sent from the *******, mid push.

Definitely hear the air moving when stepping on the gas, comes on slowly when just getting out to pass someone on a 4-lane highway... when tromping on it to get up and climb a long, steep hill, and the transmission downshifts, the RPM's jump from 2000 to 3200 then to 4500..... it HOWLS!

 

[W8TVI]

I also have an electronic LED compatible flasher/ turn signal relay but the reason I used a load resistor in the front marker lights was so the brake lights would work with LED switchbacks in the front turn signals. The 3rd brake light still worked but not the main ones. I think it had to do with the fact that the brake lights are tied into the rear marker lights which are also LED on mine. Maybe not enough load in the marker light circuit.

I think maybe my truck is just too old to have those problems...

Hrmm... now that I have the new lights in the front, I need to wait for a foggy night again so I can update my signature image again!

 

[Rivieraracing]

Pulled apart my stock stereo to see what backlighting bulbs to order for the dead bulb and when I got it all back together now half of the bulbs are dead! ahahha Good thing I ordered enough to do all 10, now gotta just wait!

 

[Fosscore]

I installed some Mormoto H1 projectors for my Co worker he is besides himself now lol
Sent from my iPhone using Tapatalk

Nice work. Looks great.

 

[Fosscore]

Ended up using Digital Dash Solutions. Didn't do it through eBay though. Just emailed the guy directly and worked out a deal. Packaging was really nice and I shipped it off on Tuesday and had it back the next Monday. It has the white needles so the blue shows through.

Got this installed today.
View attachment 74098

Sweet. Have seen that company on here numerous times.

 

[Cattivo]

What bulbs did you use


Sent from my iPhone using Tapatalk

50×LED Light White Red Green Blue Yellow Purple Pink 3mm 5mm 10mm Free Resistor | eBay

I got 5mm, 470 ohm, blue...just remember the lower the amount of ohms, the brighter the LED's get

Formula wheel electrical engineering electricity ohm's law pie chart calculation circle power wheel electric power formula fundamentals general ohm's law emf ohms audio physics electricity electronics formula wheel formulas amps watts volts ohms cosine equation audio engineering pie chart charge physics formula for power calc voltage bridging - sengpielaudio Sengpiel Berlin

I may change the values to 220/330 ohms in certain locations

 

[DDenali]

Nice work. Looks great.

Thanks bud gotta wait till Thursday for the bulbs to come in he has no idea how different it is going to be


Sent from my iPhone using Tapatalk

 

[Tonyrodz]

Thanks bud gotta wait till Thursday for the bulbs to come in he has no idea how different it is going to be


Sent from my iPhone using Tapatalk

We're gonna need some pics of that!

 

[DDenali]

We're gonna need some pics of that!

I promise you I will @Tonyrodz


Sent from my iPhone using Tapatalk

 

[Tonyrodz]

I promise you I will @Tonyrodz


Sent from my iPhone using Tapatalk

 

[DDenali]

Nice work. Looks great.

Thanks I'll have pictures of the finished product


Sent from my iPhone using Tapatalk